[PATCH 5/5] ARM: berlin/dt: add cpupll and syspll support to BG2

[Sebastian Hesselbarth]

On 03/21/2014 12:43 PM, Alexandre Belloni wrote:
> This also moves the clocks from the clocks container node to the root.

Same comments as for patch 4/5.

> Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> ---
>   arch/arm/boot/dts/berlin2.dtsi | 56 +++++++++++++++++++++++++++++-------------
>   1 file changed, 39 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
> index 56a1af2f1052..4b82076ef1ed 100644
> --- a/arch/arm/boot/dts/berlin2.dtsi
> +++ b/arch/arm/boot/dts/berlin2.dtsi
> @@ -37,24 +37,46 @@
>   		};
>   	};
>
> -	clocks {
> -		smclk: sysmgr-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <25000000>;
> -		};
> +	smclk: sysmgr-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
>
> -		cfgclk: cfg-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <100000000>;
> -		};
> +	cfgclk: cfg-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +	};
>
> -		sysclk: system-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <400000000>;
> -		};
> +	syspll: syspll {
> +		compatible = "marvell,berlin2-pll";
> +		clocks = <&smclk>;
> +		#clock-cells = <0>;
> +		reg = <0xf7ea0014 8>;
> +	};
> +
> +	cpupll: cpupll {
> +		compatible = "marvell,berlin2-pll";
> +		clocks = <&smclk>;
> +		#clock-cells = <0>;
> +		reg = <0xf7ea003c 8>;
> +	};
> +
> +	cpuclk: cpu-clock {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&cpupll>;
> +		#clock-cells = <0>;
> +		clock-div = <1>;
> +		clock-mult = <1>;
> +	};
> +
> +	twdclk: twdclk {
> +		compatible = "fixed-factor-clock";
> +		#clock-cells = <0>;
> +		clocks = <&cpuclk>;
> +		clock-mult = <1>;
> +		clock-div = <3>;
>   	};
>
>   	soc {
> @@ -83,7 +105,7 @@
>   			compatible = "arm,cortex-a9-twd-timer";
>   			reg = <0xad0600 0x20>;
>   			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&sysclk>;
> +			clocks = <&twdclk>;
>   		};
>
>   		apb at e80000 {
>