[PATCH RESEND for ARM-SoC 2/2] ARM: STi: stih41x: Add support for the FSM Serial Flash Controller

[Lee Jones]

Here we add the necessary device nodes required for successful device
probing and Pinctrl setup for the FSM when booting on an STiH415 (Orly1)
or STiH416 (Orly2) based b2020 development board.

Acked-by: Srinivas Kandagatla <srinivas.kandagatla at st.com>
Acked-by Angus Clark <angus.clark at st.com>
Acked-by: Brian Norris <computersforpeace at gmail.com>
Acked-by: Maxime Coquelin <maxime.coquelin at st.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/stih41x-b2020.dtsi  |  1 +
 arch/arm/boot/dts/stih41x-b2020x.dtsi | 28 ++++++++++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/arm/boot/dts/stih41x-b2020x.dtsi

diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index 0ef0a69..01487e0 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -6,6 +6,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * publishhed by the Free Software Foundation.
  */
+#include "stih41x-b2020x.dtsi"
 / {
 	memory{
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi
new file mode 100644
index 0000000..df01c12
--- /dev/null
+++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones at linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+	soc {
+		spifsm: spifsm at fe902000 {
+			#address-cells = <1>;
+			#size-cells    = <1>;
+
+			status = "okay";
+
+			partition at 0 {
+				label = "SerialFlash1";
+				reg   = <0x00000000 0x00500000>;
+			};
+
+			partition at 500000 {
+				label = "SerialFlash2";
+				reg   = <0x00500000 0x00b00000>;
+			};
+		};
+	};
+};
-- 
1.8.3.2