[PATCH 1/2] ARM: berlin: add scu and chipctrl device nodes for BG2/BG2Q

[Sebastian Hesselbarth]

This adds scu and general purpose registers device nodes required for
SMP on Berlin BG2 and BG2Q SoCs. The secondary CPUs will pick their jump
address from general purpose (SW generic) register 1.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
Cc: Kumar Gala <galak at codeaurora.org>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Antoine Tenart <antoine.tenart at free-electrons.com>
Cc: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/berlin2.dtsi  | 10 ++++++++++
 arch/arm/boot/dts/berlin2q.dtsi | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 56a1af2f1052..4d85312dc17a 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -72,6 +72,11 @@
 			cache-level = <2>;
 		};
 
+		scu: snoop-control-unit at ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
 		gic: interrupt-controller at ad1000 {
 			compatible = "arm,cortex-a9-gic";
 			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
@@ -176,6 +181,11 @@
 			};
 		};
 
+		generic-regs at ea0184 {
+			compatible = "marvell,berlin-generic-regs", "syscon";
+			reg = <0xea0184 0x10>;
+		};
+
 		apb at fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 07452a7483fa..86d8a2c49f38 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -87,6 +87,11 @@
 			cache-level = <2>;
 		};
 
+		scu: snoop-control-unit at ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
 		local-timer at ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
@@ -183,6 +188,11 @@
 			};
 		};
 
+		generic-regs at ea0110 {
+			compatible = "marvell,berlin-generic-regs", "syscon";
+			reg = <0xea0110 0x10>;
+		};
+
 		apb at fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.9.0