[PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand

[Santosh Shilimkar]

On Thursday 20 March 2014 04:08 PM, Ivan Khoronzhuk wrote:
> From: Murali Karicheri <m-karicheri2 at ti.com>
> 
> Sub page write doesn't work because of hw issue in controller found on
> Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
> don't seems to have any issue. So add "ti,keysone-nand" compatible
> to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.
> 
> Cc: Brian Norris <computersforpeace at gmail.com>
> Cc: Warner Losh <imp at bsdimp.com>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> 
> Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> ---
> 
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>

> This patch is a result of discussion on patch v1:
> https://lkml.org/lkml/2014/3/20/461
> 
>  drivers/mtd/nand/davinci_nand.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
> index 4615d79..b922c8e 100644
> --- a/drivers/mtd/nand/davinci_nand.c
> +++ b/drivers/mtd/nand/davinci_nand.c
> @@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 = {
>  #if defined(CONFIG_OF)
>  static const struct of_device_id davinci_nand_of_match[] = {
>  	{.compatible = "ti,davinci-nand", },
> +	{.compatible = "ti,keystone-nand", },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
> @@ -581,6 +582,11 @@ static struct davinci_nand_pdata
>  		    of_property_read_bool(pdev->dev.of_node,
>  			"ti,davinci-nand-use-bbt"))
>  			pdata->bbt_options = NAND_BBT_USE_FLASH;
> +
> +		if (of_device_is_compatible(pdev->dev.of_node,
> +					    "ti,keystone-nand")) {
> +			pdata->options |= NAND_NO_SUBPAGE_WRITE;
> +		}
>  	}
>  
>  	return dev_get_platdata(&pdev->dev);
>