[PATCH 56/62] ARM: samsung: select I2C where needed for PMIC

[Kukjin Kim]

Arnd Bergmann wrote:
> 
> The OSIRIS machine cannot build without I2C and
> TPS65010 both enabled unconditionally.
> 
> The SMDK6410_WM1190_EV1 and SMDK6410_WM1192_EV1 add-on
> cards already select MFD_WM*_I2C.
> 
> In each case, failing to enable CONFIG_I2C results in a
> build or link error, so most consistent solution is to
> ensure that it is impossible to disable those options.
> 
> It would be nice to leave CONFIG_I2C as user-selectable,
> but doing that properly would require more work.
> 
Yes, OK.

> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Cc: Tomasz Figa <tomasz.figa at gmail.com>
> Cc: Kukjin Kim <kgene.kim at samsung.com>

Acked-by: Kukjin Kim <kgene.kim at samsung.com>

Thanks,
Kukjin

> Cc: Ben Dooks <ben-linux at fluff.org>
> ---
>  arch/arm/mach-s3c24xx/Kconfig | 1 +
>  arch/arm/mach-s3c64xx/Kconfig | 2 ++
>  2 files changed, 3 insertions(+)
> 
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index a6060d0..1272647 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -572,6 +572,7 @@ config MACH_OSIRIS_DVS
>  	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
>  	depends on MACH_OSIRIS
>  	select TPS65010
> +	select I2C
>  	help
>  	  Say Y/M here if you want to have dynamic voltage scaling support
>  	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index 92885d7..0148112 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -191,6 +191,7 @@ endchoice
>  config SMDK6410_WM1190_EV1
>  	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
>  	depends on MACH_SMDK6410
> +	select I2C
>  	select MFD_WM8350_I2C
>  	select REGULATOR
>  	select REGULATOR_WM8350
> @@ -205,6 +206,7 @@ config SMDK6410_WM1190_EV1
>  config SMDK6410_WM1192_EV1
>  	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
>  	depends on MACH_SMDK6410
> +	select I2C
>  	select MFD_WM831X
>  	select MFD_WM831X_I2C
>  	select REGULATOR
> --
> 1.8.3.2