[PATCH v6 1/4] [media] exynos-scaler: Add DT bindings for SCALER driver

[Sylwester Nawrocki]

Hi,

On 19/03/14 12:31, Laurent Pinchart wrote:
>> +++ b/Documentation/devicetree/bindings/media/exynos5-scaler.txt
>> > @@ -0,0 +1,24 @@
>> > +* Samsung Exynos5 SCALER device
>> > +
>> > +SCALER is used for scaling, blending, color fill and color space
>> > +conversion on EXYNOS[5420/5410] SoCs.
>> > +
>> > +Required properties:
>> > +- compatible: should be "samsung,exynos5420-scaler" or
>> > +			"samsung,exynos5410-scaler"
>> > +- reg: should contain SCALER physical address location and length
>> > +- interrupts: should contain SCALER interrupt specifier
>> > +- clocks: should contain the SCALER clock phandle and specifier pair for
>> > +		each clock listed in clock-names property, according to
>> > +		the common clock bindings
>> > +- clock-names: should contain exactly one entry
>> > +		- "scaler" - IP bus clock
>
> I'm not too familiar with the Exynos platform, but wouldn't it make sense to 
> use a common name across IP cores for interface and function clocks ?

Certainly it would, I proposed that when the exynos clock controller
driver was posted, quite long time ago. Unfortunately it wasn't followed
up. One of serious reasons was that there are common drivers for
multiple Samsung platforms (also the ones not reworked to support dt) and
thus changing the clock names would be problematic - driver would still
need to handle multiple clock names.
But for this driver a common name like "gate" could be better IMHO.

Regards,
Sylwester