[PATCH 36/44] ARM: l2c: move errata configuration options to arch/arm/mm/Kconfig
Russell King
rmk+kernel at arm.linux.org.uk
Sun Mar 16 20:16:35 EDT 2014
Move the L2C-310 errata configuration options to arch/arm/mm/Kconfig
along side the option which enables support for this device.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/Kconfig | 51 ---------------------------------------------------
arch/arm/mm/Kconfig | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 50ccc1fdb0cb..3a0b24e4ffe9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1230,19 +1230,6 @@ config ARM_ERRATA_742231
register of the Cortex-A9 which reduces the linefill issuing
capabilities of the processor.
-config PL310_ERRATA_588369
- bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
- depends on CACHE_L2X0
- help
- The PL310 L2 cache controller implements three types of Clean &
- Invalidate maintenance operations: by Physical Address
- (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
- They are architecturally defined to behave as the execution of a
- clean operation followed immediately by an invalidate operation,
- both performing to the same memory location. This functionality
- is not correctly implemented in PL310 as clean lines are not
- invalidated as a result of these operations.
-
config ARM_ERRATA_643719
bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
depends on CPU_V7 && SMP
@@ -1265,17 +1252,6 @@ config ARM_ERRATA_720789
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
-config PL310_ERRATA_727915
- bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
- depends on CACHE_L2X0
- help
- PL310 implements the Clean & Invalidate by Way L2 cache maintenance
- operation (offset 0x7FC). This operation runs in background so that
- PL310 can handle normal accesses while it is in progress. Under very
- rare circumstances, due to this erratum, write data can be lost when
- PL310 treats a cacheable write transaction during a Clean &
- Invalidate by Way operation.
-
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
@@ -1301,21 +1277,6 @@ config ARM_ERRATA_751472
operation is received by a CPU before the ICIALLUIS has completed,
potentially leading to corrupted entries in the cache or TLB.
-config PL310_ERRATA_753970
- bool "PL310 errata: cache sync operation may be faulty"
- depends on CACHE_PL310
- help
- This option enables the workaround for the 753970 PL310 (r3p0) erratum.
-
- Under some condition the effect of cache sync operation on
- the store buffer still remains when the operation completes.
- This means that the store buffer is always asked to drain and
- this prevents it from merging any further writes. The workaround
- is to replace the normal offset of cache sync operation (0x730)
- by another offset targeting an unmapped PL310 register 0x740.
- This has the same effect as the cache sync operation: store buffer
- drain and waiting for all buffers empty.
-
config ARM_ERRATA_754322
bool "ARM errata: possible faulty MMU translations following an ASID switch"
depends on CPU_V7
@@ -1364,18 +1325,6 @@ config ARM_ERRATA_764369
relevant cache maintenance functions and sets a specific bit
in the diagnostic control register of the SCU.
-config PL310_ERRATA_769419
- bool "PL310 errata: no automatic Store Buffer drain"
- depends on CACHE_L2X0
- help
- On revisions of the PL310 prior to r3p2, the Store Buffer does
- not automatically drain. This can cause normal, non-cacheable
- writes to be retained when the memory system is idle, leading
- to suboptimal I/O performance for drivers using coherent DMA.
- This option adds a write barrier to the cpu_idle loop so that,
- on systems with an outer cache, the store buffer is drained
- explicitly.
-
config ARM_ERRATA_775420
bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
depends on CPU_V7
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index ca8ecdee47d8..118d691e70f5 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -897,6 +897,57 @@ config CACHE_PL310
This option enables optimisations for the PL310 cache
controller.
+config PL310_ERRATA_588369
+ bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
+ depends on CACHE_L2X0
+ help
+ The PL310 L2 cache controller implements three types of Clean &
+ Invalidate maintenance operations: by Physical Address
+ (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+ They are architecturally defined to behave as the execution of a
+ clean operation followed immediately by an invalidate operation,
+ both performing to the same memory location. This functionality
+ is not correctly implemented in PL310 as clean lines are not
+ invalidated as a result of these operations.
+
+config PL310_ERRATA_727915
+ bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
+ depends on CACHE_L2X0
+ help
+ PL310 implements the Clean & Invalidate by Way L2 cache maintenance
+ operation (offset 0x7FC). This operation runs in background so that
+ PL310 can handle normal accesses while it is in progress. Under very
+ rare circumstances, due to this erratum, write data can be lost when
+ PL310 treats a cacheable write transaction during a Clean &
+ Invalidate by Way operation.
+
+config PL310_ERRATA_753970
+ bool "PL310 errata: cache sync operation may be faulty"
+ depends on CACHE_PL310
+ help
+ This option enables the workaround for the 753970 PL310 (r3p0) erratum.
+
+ Under some condition the effect of cache sync operation on
+ the store buffer still remains when the operation completes.
+ This means that the store buffer is always asked to drain and
+ this prevents it from merging any further writes. The workaround
+ is to replace the normal offset of cache sync operation (0x730)
+ by another offset targeting an unmapped PL310 register 0x740.
+ This has the same effect as the cache sync operation: store buffer
+ drain and waiting for all buffers empty.
+
+config PL310_ERRATA_769419
+ bool "PL310 errata: no automatic Store Buffer drain"
+ depends on CACHE_L2X0
+ help
+ On revisions of the PL310 prior to r3p2, the Store Buffer does
+ not automatically drain. This can cause normal, non-cacheable
+ writes to be retained when the memory system is idle, leading
+ to suboptimal I/O performance for drivers using coherent DMA.
+ This option adds a write barrier to the cpu_idle loop so that,
+ on systems with an outer cache, the store buffer is drained
+ explicitly.
+
config CACHE_TAUROS2
bool "Enable the Tauros2 L2 cache controller"
depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
--
1.8.3.1
More information about the linux-arm-kernel
mailing list