[PATCH 21/44] ARM: l2c: move and add ARM L2C-2x0/L2C-310 save/resume code to non-OF
Russell King
rmk+kernel at arm.linux.org.uk
Sun Mar 16 20:15:18 EDT 2014
Add the save/resume code hooks to the non-OF implementations as well.
There's no reason for the non-OF implementations to be any different
from the OF implementations.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/mm/cache-l2x0.c | 151 ++++++++++++++++++++++++-----------------------
1 file changed, 77 insertions(+), 74 deletions(-)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index e6913bc67c34..e4e7dd4ab9b5 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -371,6 +371,21 @@ static void l2x0_enable(void __iomem *base, u32 aux)
writel_relaxed(L2X0_CTRL_EN, base + L2X0_CTRL);
}
+static void l2x0_resume(void)
+{
+ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+ /* restore aux ctrl and enable l2 */
+ l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
+
+ writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base +
+ L2X0_AUX_CTRL);
+
+ l2x0_inv_all();
+
+ writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
+ }
+}
+
static const struct l2c_init_data l2x0_init_fns __initconst = {
.enable = l2x0_enable,
.outer_cache = {
@@ -380,6 +395,7 @@ static const struct l2c_init_data l2x0_init_fns __initconst = {
.flush_all = l2x0_flush_all,
.disable = l2x0_disable,
.sync = l2x0_cache_sync,
+ .resume = l2x0_resume,
},
};
@@ -416,6 +432,65 @@ static void l2c310_enable(void __iomem *base, u32 aux)
l2c_enable(base, aux, 8);
}
+static void __init pl310_save(void __iomem *base)
+{
+ u32 l2x0_revision = readl_relaxed(base + L2X0_CACHE_ID) &
+ L2X0_CACHE_ID_RTL_MASK;
+
+ l2x0_saved_regs.tag_latency = readl_relaxed(base +
+ L2X0_TAG_LATENCY_CTRL);
+ l2x0_saved_regs.data_latency = readl_relaxed(base +
+ L2X0_DATA_LATENCY_CTRL);
+ l2x0_saved_regs.filter_end = readl_relaxed(base +
+ L2X0_ADDR_FILTER_END);
+ l2x0_saved_regs.filter_start = readl_relaxed(base +
+ L2X0_ADDR_FILTER_START);
+
+ if (l2x0_revision >= L310_CACHE_ID_RTL_R2P0) {
+ /*
+ * From r2p0, there is Prefetch offset/control register
+ */
+ l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
+ L2X0_PREFETCH_CTRL);
+ /*
+ * From r3p0, there is Power control register
+ */
+ if (l2x0_revision >= L310_CACHE_ID_RTL_R3P0)
+ l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
+ L2X0_POWER_CTRL);
+ }
+}
+
+static void pl310_resume(void)
+{
+ u32 l2x0_revision;
+
+ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+ /* restore pl310 setup */
+ writel_relaxed(l2x0_saved_regs.tag_latency,
+ l2x0_base + L2X0_TAG_LATENCY_CTRL);
+ writel_relaxed(l2x0_saved_regs.data_latency,
+ l2x0_base + L2X0_DATA_LATENCY_CTRL);
+ writel_relaxed(l2x0_saved_regs.filter_end,
+ l2x0_base + L2X0_ADDR_FILTER_END);
+ writel_relaxed(l2x0_saved_regs.filter_start,
+ l2x0_base + L2X0_ADDR_FILTER_START);
+
+ l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
+ L2X0_CACHE_ID_RTL_MASK;
+
+ if (l2x0_revision >= L310_CACHE_ID_RTL_R2P0) {
+ writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+ l2x0_base + L2X0_PREFETCH_CTRL);
+ if (l2x0_revision >= L310_CACHE_ID_RTL_R3P0)
+ writel_relaxed(l2x0_saved_regs.pwr_ctrl,
+ l2x0_base + L2X0_POWER_CTRL);
+ }
+ }
+
+ l2x0_resume();
+}
+
static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
struct outer_cache_fns *fns)
{
@@ -448,6 +523,7 @@ static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
static const struct l2c_init_data l2c310_init_fns __initconst = {
.enable = l2c310_enable,
.fixup = l2c310_fixup,
+ .save = pl310_save,
.outer_cache = {
.inv_range = l2x0_inv_range,
.clean_range = l2x0_clean_range,
@@ -455,6 +531,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = {
.flush_all = l2x0_flush_all,
.disable = l2x0_disable,
.sync = l2x0_cache_sync,
+ .resume = pl310_resume,
},
};
@@ -607,21 +684,6 @@ static void __init l2x0_of_parse(const struct device_node *np,
*aux_mask &= ~mask;
}
-static void l2x0_resume(void)
-{
- if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
- /* restore aux ctrl and enable l2 */
- l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
-
- writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base +
- L2X0_AUX_CTRL);
-
- l2x0_inv_all();
-
- writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
- }
-}
-
static const struct l2c_init_data of_l2x0_data __initconst = {
.of_parse = l2x0_of_parse,
.enable = l2x0_enable,
@@ -670,65 +732,6 @@ static void __init pl310_of_parse(const struct device_node *np,
}
}
-static void __init pl310_save(void __iomem *base)
-{
- u32 l2x0_revision = readl_relaxed(base + L2X0_CACHE_ID) &
- L2X0_CACHE_ID_RTL_MASK;
-
- l2x0_saved_regs.tag_latency = readl_relaxed(base +
- L2X0_TAG_LATENCY_CTRL);
- l2x0_saved_regs.data_latency = readl_relaxed(base +
- L2X0_DATA_LATENCY_CTRL);
- l2x0_saved_regs.filter_end = readl_relaxed(base +
- L2X0_ADDR_FILTER_END);
- l2x0_saved_regs.filter_start = readl_relaxed(base +
- L2X0_ADDR_FILTER_START);
-
- if (l2x0_revision >= L310_CACHE_ID_RTL_R2P0) {
- /*
- * From r2p0, there is Prefetch offset/control register
- */
- l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
- L2X0_PREFETCH_CTRL);
- /*
- * From r3p0, there is Power control register
- */
- if (l2x0_revision >= L310_CACHE_ID_RTL_R3P0)
- l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
- L2X0_POWER_CTRL);
- }
-}
-
-static void pl310_resume(void)
-{
- u32 l2x0_revision;
-
- if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
- /* restore pl310 setup */
- writel_relaxed(l2x0_saved_regs.tag_latency,
- l2x0_base + L2X0_TAG_LATENCY_CTRL);
- writel_relaxed(l2x0_saved_regs.data_latency,
- l2x0_base + L2X0_DATA_LATENCY_CTRL);
- writel_relaxed(l2x0_saved_regs.filter_end,
- l2x0_base + L2X0_ADDR_FILTER_END);
- writel_relaxed(l2x0_saved_regs.filter_start,
- l2x0_base + L2X0_ADDR_FILTER_START);
-
- l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
- L2X0_CACHE_ID_RTL_MASK;
-
- if (l2x0_revision >= L310_CACHE_ID_RTL_R2P0) {
- writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
- l2x0_base + L2X0_PREFETCH_CTRL);
- if (l2x0_revision >= L310_CACHE_ID_RTL_R3P0)
- writel_relaxed(l2x0_saved_regs.pwr_ctrl,
- l2x0_base + L2X0_POWER_CTRL);
- }
- }
-
- l2x0_resume();
-}
-
static const struct l2c_init_data of_pl310_data __initconst = {
.of_parse = pl310_of_parse,
.enable = l2c310_enable,
--
1.8.3.1
More information about the linux-arm-kernel
mailing list