[PATCH v4 2/4] arm64: dts: APM X-Gene PCIe device tree nodes

[Arnd Bergmann]

On Saturday 15 March 2014, Tanmay Inamdar wrote:
> On Fri, Mar 14, 2014 at 5:07 AM, Arnd Bergmann <arnd at arndb.de> wrote:
> > On Thursday 06 March 2014, Tanmay Inamdar wrote:
> >> +             pcie0: pcie at 1f2b0000 {
> >> +                     status = "disabled";
> >> +                     device_type = "pci";
> >> +                     compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
> >> +                     #interrupt-cells = <1>;
> >> +                     #size-cells = <2>;
> >> +                     #address-cells = <3>;
> >> +                     reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
> >> +                             0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */
> >> +                     reg-names = "csr", "cfg";
> >> +                     ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000   /* io */
> >> +                               0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */
> >> +                     dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
> >> +                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> >> +                     interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
> >> +                                      0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
> >> +                                      0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
> >> +                                      0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
> >> +                     clocks = <&pcie0clk 0>;
> >> +             };
> >
> > Is 0x40.0x00000000 the start of your RAM? I had expected RAM to start at 0.0,
> > and in that case the dma-ranges property would be wrong.
> 
> RAM starting address is 0x40_00000000.

Ok, it's good then. Thanks for the clarification, I keep losing track of how each of
the ~40 SoCs I'm dealing with handles these things.

	Arnd