[RFC 4/5] clocksource: omap-timer: Introduce clocksource driver for OMAP SoCs

[Suman Anna]

Hi Joel,

On 03/13/2014 03:35 PM, Joel Fernandes wrote:
> We introduce functions to initialize clocksource and clockevent, use
> CLOCKSOURCE_OF_DECLARE to declare the clocksource, and handle the clocksource
> selection on a per-SoC basis (Currently only AM335x is supported). Powering up
> of the timer will be done with the help of the mach-omap layer function that's
> introduced earlier in the series.
>
> We make a local copy of dmtimer API for use by clocksource, the original
> dmtimer API in plat-omap is kept as-is till the migration of all SoCs is
> completed after which it can't be deleted.
>
> Signed-off-by: Joel Fernandes <joelf at ti.com>
> ---
>   drivers/clocksource/Makefile     |    1 +
>   drivers/clocksource/omap-timer.c | 1157 ++++++++++++++++++++++++++++++++++++++
>   drivers/clocksource/omap-timer.h |  422 ++++++++++++++
>   3 files changed, 1580 insertions(+)
>   create mode 100644 drivers/clocksource/omap-timer.c
>   create mode 100644 drivers/clocksource/omap-timer.h
>
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index c7ca50a..2ffe698 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -37,3 +37,4 @@ obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
>   obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
>   obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
>   obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
> +obj-y					+= omap-timer.o
> diff --git a/drivers/clocksource/omap-timer.c b/drivers/clocksource/omap-timer.c
> new file mode 100644
> index 0000000..91593d8
> --- /dev/null
> +++ b/drivers/clocksource/omap-timer.c
> @@ -0,0 +1,1157 @@
> +/*
> + * drivers/clocksource/omap-timer.c
> + *
> + * OMAP Dual-Mode Timers
> + *
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
> + * Joel Fernandes <joelf at ti.com>
> + * Tarun Kanti DebBarma <tarun.kanti at ti.com>
> + * Thara Gopinath <thara at ti.com>
> + *
> + * dmtimer adaptation to platform_driver.
> + *
> + * Copyright (C) 2005 Nokia Corporation
> + * OMAP2 support by Juha Yrjola
> + * API improvements and OMAP2 clock framework support by Timo Teras
> + *
> + * Copyright (C) 2014 Texas Instruments
> + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + * You should have received a copy of the  GNU General Public License along
> + * with this program; if not, write  to the Free Software Foundation, Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +#include <linux/init.h>
> +#include <linux/time.h>
> +#include <linux/interrupt.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/irq.h>
> +#include <linux/clocksource.h>
> +#include <linux/clockchips.h>
> +#include <linux/slab.h>
> +#include <linux/sched_clock.h>
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/dmtimer-omap.h>
> +#include "omap-timer.h"
> +/*
> + *  TODO: OMAP1 support removed due to need for header mach/hardware.h
> + *        OMAP2 support may be broken due to lack of cpu_is stuff, see omap_dm_timer_get_errata
> + */
> +
> +/**
> + * omap_dm_timer_get_errata - get errata flags for a timer
> + *
> + * Get the timer errata flags that are specific to the OMAP device being used.
> + */
> +static u32 __init omap_dm_timer_get_errata(void)
> +{
> +	/* ifdef'd out due to lack of availaibility of soc.h */
> +#if 0
> +	if (cpu_is_omap24xx())
> +		return 0;

You should be able to fix this using some compatible checks.

regards
Suman

> +#endif
> +	return OMAP_TIMER_ERRATA_I103_I767;
> +}
> +
> +

-snip-