[PATCH 1/2] ARM: efm32: fix unit address part in USART2 device nodes' names

[Uwe Kleine-König]

While removing the 0x prefixes in the unit addresses in reply to a review
comment, I must somehow have messed up these two. Uups.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 arch/arm/boot/dts/efm32gg.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index a342ab0e6e4f..106d505c5d3d 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -84,7 +84,7 @@
 			status = "disabled";
 		};
 
-		spi2: spi at 40x4000c800 { /* USART2 */
+		spi2: spi at 4000c800 { /* USART2 */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "efm32,spi";
@@ -110,7 +110,7 @@
 			status = "disabled";
 		};
 
-		uart2: uart at 40x4000c800 { /* USART2 */
+		uart2: uart at 4000c800 { /* USART2 */
 			compatible = "efm32,uart";
 			reg = <0x4000c800 0x400>;
 			interrupts = <18 19>;
-- 
1.9.0