[PATCH v5 7/7] ARM: sun6i: dt: Add A31 DMA controller to DTSI

Maxime Ripard maxime.ripard at free-electrons.com
Thu Mar 13 11:14:19 EDT 2014


Now that we have a DMA driver, we can add the DMA bindings in the DTSI for the
controller and the devices supported that can use DMA.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/sun6i-a31.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 7fff9a20f079..e687b0d1e838 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -237,6 +237,15 @@
 		#size-cells = <1>;
 		ranges;
 
+		dma: dma-controller at 01c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <0 50 4>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+		};
+
 		pio: pinctrl at 01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -322,6 +331,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
 			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -333,6 +344,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
 			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -344,6 +357,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
 			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -355,6 +370,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
 			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -366,6 +383,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
 			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -377,6 +396,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 21>;
 			resets = <&apb2_rst 21>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -426,6 +447,8 @@
 			interrupts = <0 65 4>;
 			clocks = <&ahb1_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
 			resets = <&ahb1_rst 20>;
 			status = "disabled";
 		};
@@ -436,6 +459,8 @@
 			interrupts = <0 66 4>;
 			clocks = <&ahb1_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
 			resets = <&ahb1_rst 21>;
 			status = "disabled";
 		};
@@ -446,6 +471,8 @@
 			interrupts = <0 67 4>;
 			clocks = <&ahb1_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
 			resets = <&ahb1_rst 22>;
 			status = "disabled";
 		};
@@ -456,6 +483,8 @@
 			interrupts = <0 68 4>;
 			clocks = <&ahb1_gates 23>, <&spi3_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
 			resets = <&ahb1_rst 23>;
 			status = "disabled";
 		};
-- 
1.9.0




More information about the linux-arm-kernel mailing list