[PATCH v3 1/2] i2c: sunxi: Change i2c compatibles
Maxime Ripard
maxime.ripard at free-electrons.com
Thu Mar 13 07:37:22 EDT 2014
The Allwinner A10 compatibles were following a slightly different compatible
patterns than the rest of the SoCs for historical reasons. Move to the other
pattern for consistency across all Allwinner Socs.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt | 2 +-
drivers/i2c/busses/i2c-mv64xxx.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index befd4fb4764f..5c30026921ae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -5,7 +5,7 @@ Required properties :
- reg : Offset and length of the register set for the device
- compatible : Should be either:
- - "allwinner,sun4i-i2c"
+ - "allwinner,sun4i-a10-i2c"
- "allwinner,sun6i-a31-i2c"
- "marvell,mv64xxx-i2c"
- "marvell,mv78230-i2c"
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 203a5482a866..2f817b0978a2 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -692,7 +692,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
*****************************************************************************
*/
static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
- { .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+ { .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i},
{ .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
--
1.9.0
More information about the linux-arm-kernel
mailing list