[PATCH v5 3/5] clk/samsung: add support for pll2650xx

[Pankaj Dubey]

Hi Rahul,

On 03/12/2014 11:56 PM, Rahul Sharma wrote:
> Add support for pll2650xx in samsung pll file. This PLL variant
> is close to pll36xx but uses CON2 registers instead of CON1.
>
> Aud_pll in Exynos5260 is pll2650xx and uses this code.
>
> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
> ---
>   drivers/clk/samsung/clk-pll.c |  101 +++++++++++++++++++++++++++++++++++++++++
>   drivers/clk/samsung/clk-pll.h |    1 +
>   2 files changed, 102 insertions(+)
>
> diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
> index 18e42ef..b07fad2 100644
> --- a/drivers/clk/samsung/clk-pll.c
> +++ b/drivers/clk/samsung/clk-pll.c
> @@ -1049,6 +1049,101 @@ static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
>   	.recalc_rate = samsung_pll2550xx_recalc_rate,
>   };
>   
> +/*
> + * PLL2650XX Clock Type
> + */
> +
> +/* Maximum lock time can be 3000 * PDIV cycles */
> +#define PLL2650XX_LOCK_FACTOR 3000
> +
> +#define PLL2650XX_MDIV_SHIFT		9
> +#define PLL2650XX_PDIV_SHIFT		3
> +#define PLL2650XX_SDIV_SHIFT		0
> +#define PLL2650XX_KDIV_SHIFT		0
> +#define PLL2650XX_MDIV_MASK		0x1ff
> +#define PLL2650XX_PDIV_MASK		0x3f
> +#define PLL2650XX_SDIV_MASK		0x7
> +#define PLL2650XX_KDIV_MASK		0xffff
> +#define PLL2650XX_PLL_ENABLE_SHIFT	23
> +#define PLL2650XX_PLL_LOCKTIME_SHIFT	21
> +#define PLL2650XX_PLL_FOUTMASK_SHIFT	31
> +
> +static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
> +				unsigned long parent_rate)
> +{
> +	struct samsung_clk_pll *pll = to_clk_pll(hw);
> +	u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
> +	s16 kdiv;
> +	u64 fvco = parent_rate;
> +
> +	pll_con0 = __raw_readl(pll->con_reg);
> +	pll_con2 = __raw_readl(pll->con_reg + 8);
> +	mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
> +	pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
> +	sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
> +	kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
> +
> +	fvco *= (mdiv << 16) + kdiv;
> +	do_div(fvco, (pdiv << sdiv));
> +	fvco >>= 16;
> +
> +	return (unsigned long)fvco;
> +}
> +
> +static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
> +					unsigned long parent_rate)
> +{
> +	struct samsung_clk_pll *pll = to_clk_pll(hw);
> +	u32 tmp, pll_con0, pll_con2;
> +	const struct samsung_pll_rate_table *rate;
> +
> +	rate = samsung_get_pll_settings(pll, drate);
> +	if (!rate) {
> +		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
> +			drate, __clk_get_name(hw->clk));
> +		return -EINVAL;
> +	}
> +
> +	pll_con0 = __raw_readl(pll->con_reg);
> +	pll_con2 = __raw_readl(pll->con_reg + 8);
> +
> +	 /* Change PLL PMS values */
> +	pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
> +			PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
> +			PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
> +	pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
> +	pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
> +	pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
> +	pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
> +	pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
> +
> +	pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
> +	pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
> +			<< PLL2650XX_KDIV_SHIFT;
> +
> +	/* Set PLL lock time. */
> +	__raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
> +
> +	__raw_writel(pll_con0, pll->con_reg);
> +	__raw_writel(pll_con2, pll->con_reg + 8);
> +
> +	do {
> +		tmp = __raw_readl(pll->con_reg);
> +	} while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT)));
> +
> +	return 0;
> +}
> +
> +static const struct clk_ops samsung_pll2650xx_clk_ops = {
> +	.recalc_rate = samsung_pll2650xx_recalc_rate,
> +	.set_rate = samsung_pll2650xx_set_rate,
> +	.round_rate = samsung_pll_round_rate,
> +};
> +
> +static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
> +	.recalc_rate = samsung_pll2650xx_recalc_rate,
> +};
> +
>   static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
>   				struct samsung_pll_clock *pll_clk,
>   				void __iomem *base)
> @@ -1157,6 +1252,12 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
>   		else
>   			init.ops = &samsung_pll2550xx_clk_ops;
>   		break;
> +	case pll_2650xx:
> +		if (!pll->rate_table)
> +			init.ops = &samsung_pll2650xx_clk_min_ops;
> +		else
> +			init.ops = &samsung_pll2650xx_clk_ops;
> +		break;
>   	default:
>   		pr_warn("%s: Unknown pll type for pll clk %s\n",
>   			__func__, pll_clk->name);
> diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
> index ec4bc1d..c0ed4d4 100644
> --- a/drivers/clk/samsung/clk-pll.h
> +++ b/drivers/clk/samsung/clk-pll.h
> @@ -32,6 +32,7 @@ enum samsung_pll_type {
>   	pll_s3c2410_upll,
>   	pll_s3c2440_mpll,
>   	pll_2550xx,
> +	pll_2650xx,
>   };
>   
>   #define PLL_35XX_RATE(_rate, _m, _p, _s)			\

Reviewed-by: Pankaj Dubey <pankaj.dubey at samsung,com <mailto:t.figa at samsung.com>>

-- 
Best Regards,
Pankaj Dubey