[PATCH v5 3/3] ARM: dts: add dts files for xyref5260 board

[Pankaj Dubey]

Hi Rahul,

On 03/13/2014 12:16 AM, Rahul Sharma wrote:
> The patch adds the dts files for xyref5260 board which
> is based on Exynos5260 Evt0 sample.
>
> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
> ---
>   arch/arm/boot/dts/Makefile                      |    1 +
>   arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts |  110 +++++++++++++++++++++++
>   2 files changed, 111 insertions(+)
>   create mode 100644 arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b9d6a8b..5a391bf 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>   	exynos5250-arndale.dtb \
>   	exynos5250-smdk5250.dtb \
>   	exynos5250-snow.dtb \
> +	exynos5260-xyref5260-evt0.dtb \
>   	exynos5420-arndale-octa.dtb \
>   	exynos5420-smdk5420.dtb \
>   	exynos5440-sd5v1.dtb \
> diff --git a/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts
> new file mode 100644
> index 0000000..d7d0aeb
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts
> @@ -0,0 +1,110 @@
> +/*
> + * SAMSUNG XYREF5260 EVT0 board device tree source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +#include "exynos5260.dtsi"
> +
> +/ {
> +	model = "SAMSUNG XYREF5260 EVT0 board based on EXYNOS5260";
> +	compatible = "samsung,xyref5260", "samsung,exynos5260";
> +
> +	memory {
> +		reg = <0x20000000 0x80000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttySAC2,115200";
> +	};
> +
> +	clocks {
> +		fin_pll: xxti {
> +			compatible = "fixed-clock";
> +			clock-frequency = <24000000>;
> +			clock-output-names = "fin_pll";
> +			#clock-cells = <0>;
> +		};
> +
> +		xrtcxti: xrtcxti {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32768>;
> +			clock-output-names = "xrtcxti";
> +		};

clock-cells property is missing here.

> +
> +		spdif_extclk: ioclk_spdif_extclk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <49152000>;
> +			clock-output-names = "ioclk_spdif_extclk";
> +		};

ditto.

> +	};
> +};

May I know why other phyclocks and ioclks have not been added?

> +
> +&pinctrl_0 {
> +	hdmi_hpd_irq: hdmi-hpd-irq {
> +		samsung,pins = "gpx3-7";
> +		samsung,pin-function = <0>;
> +		samsung,pin-pud = <1>;
> +		samsung,pin-drv = <0>;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	status = "okay";
> +};
> +
> +&mmc_0 {
> +	status = "okay";
> +	num-slots = <1>;
> +	broken-cd;
> +	bypass-smu;
> +	supports-highspeed;
> +	supports-hs200-mode; /* 200 Mhz */
> +	card-detect-delay = <200>;
> +	samsung,dw-mshc-ciu-div = <3>;
> +	samsung,dw-mshc-sdr-timing = <0 4>;
> +	samsung,dw-mshc-ddr-timing = <0 2>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
> +
> +	slot at 0 {
> +		reg = <0>;
> +		bus-width = <8>;
> +	};
> +};
> +
> +&mmc_2 {
> +	status = "okay";
> +	num-slots = <1>;
> +	supports-highspeed;
> +	card-detect-delay = <200>;
> +	samsung,dw-mshc-ciu-div = <3>;
> +	samsung,dw-mshc-sdr-timing = <2 3>;
> +	samsung,dw-mshc-ddr-timing = <1 2>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
> +
> +	slot at 0 {
> +		reg = <0>;
> +		bus-width = <4>;
> +		disable-wp;
> +	};
> +};


-- 
Best Regards,
Pankaj Dubey