[PATCH 0/7] ARM: dts: overo: Add new expansion boards
Florian Vaussard
florian.vaussard at epfl.ch
Tue Mar 11 08:20:28 EDT 2014
Hi,
This series adds the support for 5 new expansion boards from Gumstix:
- Palo43
- Gallop43
- Chestnut43
- Alto35
- Summit
The 1st patch is a preparatory work, in order to factorize some
peripherals that are common to most Gumstix expansion boards. Patch 2
adds the support for an accelerometer that is present on most boards.
Palo43, Gallop43 and Chestnut43 are all pretty similar. I tested
on a Gallop43 (with both OMAP35xx and OMAP36xx Overo).
Alto35 is slightly different. Again, I tested with both OMAP35xx and
OMAP36xx Overo.
Summit is pretty similar to Tobi. I do not have a Summit at hand,
but given the similarity with Tobi, it should work fine.
To avoid unnecessary duplications, I put all the common stuff for each
board inside an omap3-overo-xxx-common.dsti include file. By doing so,
I can have minimal SoC-specific omap3-overo-xxx.dts (omap34xx based)
and omap3-overo-storm-xxx.dts (omap36xx based) device trees.
This series depends on my previous Overo series [1]. A complete testing
tree (including the graphics support, soon to be posted) is available
at [2].
Regards,
Florian
[1] http://thread.gmane.org/gmane.linux.ports.arm.omap/111558
[2] https://github.com/vaussard/linux.git (overo/for-3.15/review1)
Florian Vaussard (7):
ARM: dts: overo: Create a file for common Gumstix peripherals
ARM: dts: overo: Add LIS33DE accelerometer
ARM: dts: Add support for the Overo Palo43
ARM: dts: Add support for the Overo Gallop43
ARM: dts: Add support for the Overo Alto35
ARM: dts: Add support for the Overo Chestnut43
ARM: dts: Add support for the Overo Summit
arch/arm/boot/dts/Makefile | 10 +++
arch/arm/boot/dts/omap3-overo-alto35-common.dtsi | 77 ++++++++++++++++++
arch/arm/boot/dts/omap3-overo-alto35.dts | 22 +++++
.../boot/dts/omap3-overo-chestnut43-common.dtsi | 69 ++++++++++++++++
arch/arm/boot/dts/omap3-overo-chestnut43.dts | 38 +++++++++
.../boot/dts/omap3-overo-common-peripherals.dtsi | 94 ++++++++++++++++++++++
arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi | 57 +++++++++++++
arch/arm/boot/dts/omap3-overo-gallop43.dts | 38 +++++++++
arch/arm/boot/dts/omap3-overo-palo43-common.dtsi | 53 ++++++++++++
arch/arm/boot/dts/omap3-overo-palo43.dts | 38 +++++++++
arch/arm/boot/dts/omap3-overo-storm-alto35.dts | 21 +++++
arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts | 38 +++++++++
arch/arm/boot/dts/omap3-overo-storm-gallop43.dts | 38 +++++++++
arch/arm/boot/dts/omap3-overo-storm-palo43.dts | 38 +++++++++
arch/arm/boot/dts/omap3-overo-storm-summit.dts | 30 +++++++
arch/arm/boot/dts/omap3-overo-summit-common.dtsi | 31 +++++++
arch/arm/boot/dts/omap3-overo-summit.dts | 30 +++++++
arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 38 +--------
18 files changed, 725 insertions(+), 35 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
create mode 100644 arch/arm/boot/dts/omap3-overo-alto35.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
create mode 100644 arch/arm/boot/dts/omap3-overo-chestnut43.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
create mode 100644 arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
create mode 100644 arch/arm/boot/dts/omap3-overo-gallop43.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
create mode 100644 arch/arm/boot/dts/omap3-overo-palo43.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-storm-alto35.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-storm-palo43.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-storm-summit.dts
create mode 100644 arch/arm/boot/dts/omap3-overo-summit-common.dtsi
create mode 100644 arch/arm/boot/dts/omap3-overo-summit.dts
--
1.8.3.2
More information about the linux-arm-kernel
mailing list