[PATCH v2][ 2/8] ARM: dts: mx35: USB block requires only one clock

[Denis Carikli]

From: Fabio Estevam <fabio.estevam at freescale.com>

Like other imx SoCs only one USB clock is needed on mx35.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/boot/dts/imx35.dtsi |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index e59ccb4..474a73d 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -296,8 +296,7 @@
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 73>;
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@@ -306,8 +305,7 @@
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 73>;
 				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
-- 
1.7.9.5