[RFC 4/6] sched: powerpc: create a dedicated topology table

[Preeti U Murthy]

Hi Vincent,

On 03/05/2014 12:48 PM, Vincent Guittot wrote:
> Create a dedicated topology table for handling asymetric feature.
> The current proposal creates a new level which describes which groups of CPUs
> take adavantge of SD_ASYM_PACKING. The useless level will be removed during the
> build of the sched_domain topology.
> 
> Another solution would be to set SD_ASYM_PACKING in the sd_flags of SMT level
> during the boot sequence and before the build of the sched_domain topology.

Is the below what you mean as the other solution? If it is so, I would
strongly recommend this approach rather than adding another level to the
topology level to represent the asymmetric behaviour.

+static struct sched_domain_topology_level powerpc_topology[] = {
+#ifdef CONFIG_SCHED_SMT
+	{ cpu_smt_mask, SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES,
SD_INIT_NAME(SMT) | arch_sd_sibling_asym_packing() },
+#endif
+	{ cpu_cpu_mask, SD_INIT_NAME(DIE) },
+	{ NULL, },
+};

Regards
Preeti U Murthy
> 
> Signed-off-by: Vincent Guittot <vincent.guittot at linaro.org>
> ---
>  arch/powerpc/kernel/smp.c |   35 +++++++++++++++++++++++++++--------
>  kernel/sched/core.c       |    6 ------
>  2 files changed, 27 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
> index ac2621a..75da054 100644
> --- a/arch/powerpc/kernel/smp.c
> +++ b/arch/powerpc/kernel/smp.c
> @@ -755,6 +755,32 @@ int setup_profiling_timer(unsigned int multiplier)
>  	return 0;
>  }
> 
> +#ifdef CONFIG_SCHED_SMT
> +/* cpumask of CPUs with asymetric SMT dependancy */
> +static const struct cpumask *cpu_asmt_mask(int cpu)
> +{
> +	if (cpu_has_feature(CPU_FTR_ASYM_SMT)) {
> +		printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n");
> +		return topology_thread_cpumask(cpu);
> +	}
> +	return cpumask_of(cpu);
> +}
> +#endif
> +
> +static struct sched_domain_topology_level powerpc_topology[] = {
> +#ifdef CONFIG_SCHED_SMT
> +	{ cpu_asmt_mask, SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES | SD_ASYM_PACKING, SD_INIT_NAME(ASMT) },
> +	{ cpu_smt_mask, SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES, SD_INIT_NAME(SMT) },
> +#endif
> +	{ cpu_cpu_mask, SD_INIT_NAME(DIE) },
> +	{ NULL, },
> +};
> +
> +static void __init set_sched_topology(void)
> +{
> +	sched_domain_topology = powerpc_topology;
> +}
> +
>  void __init smp_cpus_done(unsigned int max_cpus)
>  {
>  	cpumask_var_t old_mask;
> @@ -779,15 +805,8 @@ void __init smp_cpus_done(unsigned int max_cpus)
> 
>  	dump_numa_cpu_topology();
> 
> -}
> +	set_sched_topology();
> 
> -int arch_sd_sibling_asym_packing(void)
> -{
> -	if (cpu_has_feature(CPU_FTR_ASYM_SMT)) {
> -		printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n");
> -		return SD_ASYM_PACKING;
> -	}
> -	return 0;
>  }
> 
>  #ifdef CONFIG_HOTPLUG_CPU
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index 3479467..7606de0 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -5818,11 +5818,6 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
>  	atomic_set(&sg->sgp->nr_busy_cpus, sg->group_weight);
>  }
> 
> -int __weak arch_sd_sibling_asym_packing(void)
> -{
> -       return 0*SD_ASYM_PACKING;
> -}
> -
>  /*
>   * Initializers for schedule domains
>   * Non-inlined to reduce accumulated stack pressure in build_sched_domains()
> @@ -6000,7 +5995,6 @@ sd_init(struct sched_domain_topology_level *tl, int cpu)
>  	if (sd->flags & SD_SHARE_CPUPOWER) {
>  		sd->imbalance_pct = 110;
>  		sd->smt_gain = 1178; /* ~15% */
> -		sd->flags |= arch_sd_sibling_asym_packing();
> 
>  	} else if (sd->flags & SD_SHARE_PKG_RESOURCES) {
>  		sd->imbalance_pct = 117;
>