[PATCH 1/5] ARM: dts: exynos4x12: Add ADC's dt data to read raw data

[Chanwoo Choi]

This patch add ADC(Analog to Digital Converter)'s dt data to get raw data
with IIO subsystem. Usually, ADC is used to check temperature, jack type, and
so on.

Register map
- <0x126C0000 0x100> : ADC register's base address
- <0x10020718 0x4> : ADC_PHY_CONTROL, TS-ADC control register address

Clock
- <&clock 326> : ADC clock (clock name :'tsadc')

Interrupt
- INTG10[3] : ADC for General ADC

Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 arch/arm/boot/dts/exynos4x12.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 5c412aa..5a3e551 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -80,6 +80,18 @@
 		};
 	};
 
+	adc: adc at 126C0000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 3>;
+		clocks = <&clock 326>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
+
 	pinctrl_2: pinctrl at 03860000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x03860000 0x1000>;
-- 
1.8.0