[PATCH 5/7] ARM: dts: mx25: USB block requires only one clock

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Like other imx SoCs only one USB clock is needed on mx25.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/boot/dts/imx25.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index ab5c282..ebe80bf 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -494,8 +494,7 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 70>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy1>;
 				status = "disabled";
@@ -505,8 +504,7 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 70>;
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy2>;
 				status = "disabled";
-- 
1.8.1.2