[RFC PATCH 0/9] drivers: dma: Add support for dma-channel router
Sricharan R
r.sricharan at ti.com
Fri Mar 7 07:16:07 EST 2014
In some SoCs the dma request lines from the peripherals are
routed to the dma-controller through a crossbar. With this the
dma controller's available request lines are shared between the
peripherals.
This adds support to register the crossbar router associated with
a dma-channel and let the dma-controller driver map/unmap
the peripheral dma crossbar line to dma-controller's request
line.
This is on top of Russell's OMAP dma engine rework series
http://www.spinics.net/lists/linux-omap/msg102969.html
Sricharan R (9):
drivers: dma: omap-dma: Avoid hard-coding of the dma-request channels
drivers: dma: of-dma: Add support for dma-request line routers
drivers: dma: omap-dma: Add a seperate xlate function to get router
data
drivers: omap-dma: Add crossbar line as a resource to omap_chan
structure
drivers: dma: Add dma crossbar driver
arm: dts: dra: Add dma crossbar node
arm: dts: dra: Add dma-request router phandle to dma-specs
arm: dra: Enable dma crossbar support on dra7xx
arm: dts: dra7: Change the total dma-req numbers to crossbar channels
.../devicetree/bindings/arm/omap/dma-crossbar.txt | 26 +++
arch/arm/boot/dts/dra7.dtsi | 47 +++--
arch/arm/configs/omap2plus_defconfig | 1 +
drivers/dma/Kconfig | 7 +
drivers/dma/Makefile | 1 +
drivers/dma/of-dma.c | 82 +++++++-
drivers/dma/omap-dma-xbar.c | 219 ++++++++++++++++++++
drivers/dma/omap-dma-xbar.h | 32 +++
drivers/dma/omap-dma.c | 72 ++++++-
include/linux/of_dma.h | 22 ++
10 files changed, 479 insertions(+), 30 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/omap/dma-crossbar.txt
create mode 100644 drivers/dma/omap-dma-xbar.c
create mode 100644 drivers/dma/omap-dma-xbar.h
--
1.7.9.5
More information about the linux-arm-kernel
mailing list