[RFC PATCH v2 1/1] arm64: Add boot time configuration of Intermediate Physical Address size
mohun106 at gmail.com
mohun106 at gmail.com
Fri Mar 7 03:49:25 EST 2014
From: Radha Mohan Chintakuntla <rchintakuntla at cavium.com>
ARMv8 supports a range of physical address bit sizes. The PARange bits
from ID_AA64MMFR0_EL1 register are read during boot-time and the
intermediate physical address size bits are written in the translation
control registers (TCR_EL1 and VTCR_EL2).
There is no change in the VA bits and levels of translation.
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla at cavium.com>
---
arch/arm64/include/asm/kvm_arm.h | 15 ++++++---------
arch/arm64/include/asm/pgtable-hwdef.h | 5 ++---
arch/arm64/kvm/hyp-init.S | 6 ++++++
arch/arm64/mm/proc.S | 8 +++++++-
4 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 0eb3986..21ef48d 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -106,7 +106,6 @@
/* VTCR_EL2 Registers bits */
#define VTCR_EL2_PS_MASK (7 << 16)
-#define VTCR_EL2_PS_40B (2 << 16)
#define VTCR_EL2_TG0_MASK (1 << 14)
#define VTCR_EL2_TG0_4K (0 << 14)
#define VTCR_EL2_TG0_64K (1 << 14)
@@ -129,10 +128,9 @@
* 64kB pages (TG0 = 1)
* 2 level page tables (SL = 1)
*/
-#define VTCR_EL2_FLAGS (VTCR_EL2_PS_40B | VTCR_EL2_TG0_64K | \
- VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \
- VTCR_EL2_IRGN0_WBWA | VTCR_EL2_SL0_LVL1 | \
- VTCR_EL2_T0SZ_40B)
+#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
+ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
+ VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
#define VTTBR_X (38 - VTCR_EL2_T0SZ_40B)
#else
/*
@@ -142,10 +140,9 @@
* 4kB pages (TG0 = 0)
* 3 level page tables (SL = 1)
*/
-#define VTCR_EL2_FLAGS (VTCR_EL2_PS_40B | VTCR_EL2_TG0_4K | \
- VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \
- VTCR_EL2_IRGN0_WBWA | VTCR_EL2_SL0_LVL1 | \
- VTCR_EL2_T0SZ_40B)
+#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
+ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
+ VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
#endif
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index b1d2e26..f7af66b 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -100,9 +100,9 @@
#define PTE_HYP PTE_USER
/*
- * 40-bit physical address supported.
+ * Highest possible physical address supported.
*/
-#define PHYS_MASK_SHIFT (40)
+#define PHYS_MASK_SHIFT (48)
#define PHYS_MASK ((UL(1) << PHYS_MASK_SHIFT) - 1)
/*
@@ -122,7 +122,6 @@
#define TCR_SHARED ((UL(3) << 12) | (UL(3) << 28))
#define TCR_TG0_64K (UL(1) << 14)
#define TCR_TG1_64K (UL(1) << 30)
-#define TCR_IPS_40BIT (UL(2) << 32)
#define TCR_ASID16 (UL(1) << 36)
#define TCR_TBI0 (UL(1) << 37)
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index 2b0244d..d968796 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -68,6 +68,12 @@ __do_hyp_init:
msr tcr_el2, x4
ldr x4, =VTCR_EL2_FLAGS
+ /*
+ * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
+ * VTCR_EL2.
+ */
+ mrs x5, ID_AA64MMFR0_EL1
+ bfi x4, x5, #16, #3
msr vtcr_el2, x4
mrs x4, mair_el1
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index e0ef63c..e085ee6 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -209,8 +209,14 @@ ENTRY(__cpu_setup)
* Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
* both user and kernel.
*/
- ldr x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | TCR_IPS_40BIT | \
+ ldr x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | \
TCR_ASID16 | TCR_TBI0 | (1 << 31)
+ /*
+ * Read the PARange bits from ID_AA64MMFR0_EL1 and set the IPS bits in
+ * TCR_EL1.
+ */
+ mrs x9, ID_AA64MMFR0_EL1
+ bfi x10, x9, #32, #3
#ifdef CONFIG_ARM64_64K_PAGES
orr x10, x10, TCR_TG0_64K
orr x10, x10, TCR_TG1_64K
--
1.7.1
More information about the linux-arm-kernel
mailing list