[PATCH v4] phy: omap-control: update dra7 and am437 usb2 Documentation bindings

[Kishon Vijay Abraham I]

On Friday 07 March 2014 01:55 PM, Kishon Vijay Abraham I wrote:
> From: Felipe Balbi <balbi at ti.com>
>
> From: Roger Quadros <rogerq at ti.com>

There seems to be some problem with this patch. Pls ignore this.

Thanks
Kishon
>
> The dra7-usb2 and am437-usb2 bindings have not yet been used.
> Change them to be more elegant.
>
> Acked-by: Kishon Vijay Abraham I <kishon at ti.com>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> Signed-off-by: Felipe Balbi <balbi at ti.com>
> ---
> Changes from v3:
> * changed the compatible name to 'ti,control-phy-usb2-dra7' and
>    'ti,control-phy-usb2-am437'
>
>   Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
> index 41dc132..8694aae 100644
> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
> @@ -9,9 +9,9 @@ Required properties:
>                           e.g. USB2_PHY on OMAP5.
>    "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
>                           e.g. USB3 PHY and SATA PHY on OMAP5.
> - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
> + "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
>                           DRA7 platform.
> - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
> + "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
>                           AM437 platform.
>    - reg : Address and length of the register set for the device. It contains
>      the address of "otghs_control" for control-phy-otghs or "power" register
>