[PATCH] Disable Subpage nand write when using Atmel PMECC

[Josh Wu]

Dear Herve

I add the Brian in the email, who is the maintainer of the mtd.

On 3/3/2014 7:15 PM, Herve Codina wrote:
> Crash detected on sam5d35 and its pmecc nand ecc controller.
>
> The problem was a call to chip->ecc.hwctl from nand_write_subpage_hwecc
> (nand_base.c) when we write a sub page.
> chip->ecc.hwctl function is not set when we are using PMECC controller.
> As a workaround, set NAND_NO_SUBPAGE_WRITE for PMECC controller in
> order to disable sub page access in nand_write_page.
>
>
> Signed-off-by: Herve Codina <Herve.CODINA at celad.com>

Acked-by: Josh Wu <josh.wu at atmel.com>

> ---
>   drivers/mtd/nand/atmel_nand.c |    1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index 1f719e0..4ce181a 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -1220,6 +1220,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
>   		goto err;
>   	}
>   
> +	nand_chip->options |= NAND_NO_SUBPAGE_WRITE;
>   	nand_chip->ecc.read_page = atmel_nand_pmecc_read_page;
>   	nand_chip->ecc.write_page = atmel_nand_pmecc_write_page;
>   

Best Regards,
Josh Wu