[PATCH v6 01/10] Documentation: dt: Add binding documentation for S5K6A3 image sensor

[Philipp Zabel]

Hi Sylwester,

On Thu, Mar 6, 2014 at 5:20 PM, Sylwester Nawrocki
<s.nawrocki at samsung.com> wrote:
> This patch adds binding documentation for the Samsung S5K6A3(YX)
> raw image sensor.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
> Acked-by: Mark Rutland <mark.rutland at arm.com>
> ---
> Changes since v5:
>   - none.
>
> Changes since v2:
>  - rephrased 'clocks' and 'clock-names' properties' description;
> ---
>  .../devicetree/bindings/media/samsung-s5k6a3.txt   |   33 ++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
>
> diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
> new file mode 100644
> index 0000000..cce01e8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
> @@ -0,0 +1,33 @@
> +Samsung S5K6A3(YX) raw image sensor
> +---------------------------------
> +
> +S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
> +and CCI (I2C compatible) control bus.
> +
> +Required properties:
> +
> +- compatible   : "samsung,s5k6a3";
> +- reg          : I2C slave address of the sensor;
> +- svdda-supply : core voltage supply;
> +- svddio-supply        : I/O voltage supply;
> +- afvdd-supply : AF (actuator) voltage supply;
> +- gpios                : specifier of a GPIO connected to the RESET pin;

Please use 'reset-gpios' for GPIOs connected to reset pins.

regards
Philipp