[PATCH 1/6] ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC
Florian Fainelli
f.fainelli at gmail.com
Thu Mar 6 12:45:54 EST 2014
This patch adds basic support for the Broadcom BCM63138 DSL SoC which is
using a dual-core Cortex A9 system. Add the very minimum required code
boot Linux on this SoC.
Due to the two specific register address spaces located at 0x8000_0000
and 0xfffe_0000, we need to setup a specific iotable descriptor for
those to be remapped at the expected virtual addresses.
Finally, the PL310 cache controller requires a bit of tweaking before
handing its initialization over l2x0_of_init(), this is also taken care
of to make sure that its size is properly configured.
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
.../devicetree/bindings/arm/bcm/bcm63138.txt | 9 +++
arch/arm/mach-bcm/Kconfig | 20 +++++
arch/arm/mach-bcm/Makefile | 2 +
arch/arm/mach-bcm/bcm63xx.h | 29 +++++++
arch/arm/mach-bcm/board_bcm63xx.c | 94 ++++++++++++++++++++++
5 files changed, 154 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm63138.txt
create mode 100644 arch/arm/mach-bcm/bcm63xx.h
create mode 100644 arch/arm/mach-bcm/board_bcm63xx.c
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/bcm63138.txt
new file mode 100644
index 000000000000..bd49987a8812
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm63138.txt
@@ -0,0 +1,9 @@
+Broadcom BCM63138 DSL System-on-a-Chip device tree bindings
+-----------------------------------------------------------
+
+Boards compatible with the BCM63138 DSL System-on-a-Chip should have the
+following properties:
+
+Required root node property:
+
+compatible: should be "brcm,bcm63138"
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b1aa6a9b3bd1..951e1ec47a04 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -32,6 +32,26 @@ config ARCH_BCM_MOBILE
BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
+config ARCH_BCM_63XX
+ bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
+ depends on MMU
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369 if SMP
+ select ARM_GIC
+ select ARM_GLOBAL_TIMER
+ select CACHE_L2X0
+ select COMMON_CLK
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_ARM_TWD if SMP
+ select HAVE_ARM_SCU if SMP
+ select HAVE_SMP
+ help
+ This enables support for systems based on Broadcom DSL SoCs.
+ It currently supports the 'BCM63XX' ARM-based family, which includes
+ the BCM63138 variant.
+
endmenu
endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index c2ccd5a0f772..3bf068ac797a 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -13,3 +13,5 @@
obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
+
+obj-$(CONFIG_ARCH_BCM_63XX) := board_bcm63xx.o
diff --git a/arch/arm/mach-bcm/bcm63xx.h b/arch/arm/mach-bcm/bcm63xx.h
new file mode 100644
index 000000000000..95872c8131f6
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm63xx.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARM_BCM63XX_H
+#define __ARM_BCM63XX_H
+
+#define IO_ADDRESS(x) (((x) & 0x00ffffff) + 0xfc000000)
+
+/* AHB register space */
+#define BCM63XX_AHB_PHYS 0x80001000
+#define BCM63XX_AHB_VIRT IO_ADDRESS(BCM63XX_AHB_PHYS)
+#define BCM63XX_AHB_SIZE 0x800000
+
+/* PERIPH (legacy) register space */
+#define BCM63XX_PERIPH_PHYS 0xfffe8000
+#define BCM63XX_PERIPH_VIRT IO_ADDRESS(BCM63XX_PERIPH_PHYS)
+#define BCM63XX_PERIPH_SIZE 0x10000
+
+#endif /* __ARM_BCM63XX_H */
diff --git a/arch/arm/mach-bcm/board_bcm63xx.c b/arch/arm/mach-bcm/board_bcm63xx.c
new file mode 100644
index 000000000000..a779aca673c4
--- /dev/null
+++ b/arch/arm/mach-bcm/board_bcm63xx.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "bcm63xx.h"
+
+static void __init bcm63xx_l2cc_init(void)
+{
+ u32 auxctl_val = 0, auxctl_msk = ~0UL;
+
+ /* 16-way cache */
+ auxctl_val |= (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT);
+ auxctl_msk &= ~(1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT);
+ /* 32 KB */
+ auxctl_val |= (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+ auxctl_msk &= ~(L2X0_AUX_CTRL_WAY_SIZE_MASK);
+
+ /*
+ * Set bit 22 in the auxiliary control register. If this bit
+ * is cleared, PL310 treats Normal Shared Non-cacheable
+ * accesses as Cacheable no-allocate.
+ */
+ auxctl_val |= (1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT);
+
+ /* Allow non-secure access */
+ auxctl_val |= (1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT);
+ /* Instruction prefetch */
+ auxctl_val |= (1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT);
+ /* Early BRESP */
+ auxctl_val |= (1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT);
+
+ l2x0_of_init(auxctl_val, auxctl_msk);
+}
+
+static void __init bcm63xx_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL,
+ &platform_bus);
+ bcm63xx_l2cc_init();
+}
+
+static const char * const bcm63xx_dt_compat[] = {
+ "brcm,bcm63138",
+ NULL
+};
+
+static struct map_desc bcm63xx_map_desc[] __initdata = {
+ /* AHB register space */
+ {
+ .virtual = BCM63XX_AHB_VIRT,
+ .pfn = __phys_to_pfn(BCM63XX_AHB_PHYS),
+ .length = BCM63XX_AHB_SIZE,
+ .type = MT_DEVICE,
+ },
+ /* PERIPH register space */
+ {
+ .virtual = BCM63XX_PERIPH_VIRT,
+ .pfn = __phys_to_pfn(BCM63XX_PERIPH_PHYS),
+ .length = BCM63XX_PERIPH_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init bcm63xx_map_io(void)
+{
+ iotable_init(bcm63xx_map_desc, ARRAY_SIZE(bcm63xx_map_desc));
+}
+
+DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC")
+ .map_io = bcm63xx_map_io,
+ .init_machine = bcm63xx_init,
+ .dt_compat = bcm63xx_dt_compat,
+MACHINE_END
--
1.8.3.2
More information about the linux-arm-kernel
mailing list