[PATCH v9][ 6/8] staging: imx-drm: parallel display: add regulator support.
Denis Carikli
denis at eukrea.com
Thu Mar 6 11:04:27 EST 2014
Signed-off-by: Denis Carikli <denis at eukrea.com>
---
ChangeLog v8->v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7->v8:
- Shrinked even more the Cc list.
- Rebased.
ChangeLog v6->v7:
- Shrinked even more the Cc list.
- Rebased the patch and included video/of_display_timing.h
---
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 1 +
drivers/staging/imx-drm/parallel-display.c | 13 +++++++++++++
2 files changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index 2d24425..4dd7ce5 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -28,6 +28,7 @@ Required properties:
- compatible: Should be "fsl,imx-parallel-display"
- crtc: the crtc this display is connected to, see below
Optional properties:
+- display-supply : phandle to the regulator device tree node if needed.
- interface_pix_fmt: How this display is connected to the
crtc. Currently supported types: "rgb24", "rgb565", "bgr666", "rgb666"
- edid: verbatim EDID data block describing attached display.
diff --git a/drivers/staging/imx-drm/parallel-display.c b/drivers/staging/imx-drm/parallel-display.c
index 084500b..0e0c5ac 100644
--- a/drivers/staging/imx-drm/parallel-display.c
+++ b/drivers/staging/imx-drm/parallel-display.c
@@ -24,6 +24,7 @@
#include <drm/drm_fb_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_panel.h>
+#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <video/of_display_timing.h>
@@ -36,6 +37,7 @@ struct imx_parallel_display {
struct drm_connector connector;
struct drm_encoder encoder;
struct device *dev;
+ struct regulator *disp_reg;
void *edid;
int edid_len;
u32 interface_pix_fmt;
@@ -155,6 +157,9 @@ static void imx_pd_encoder_prepare(struct drm_encoder *encoder)
{
struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
+ if (regulator_enable(imxpd->disp_reg))
+ dev_err(imxpd->dev, "Failed to enable regulator.\n");
+
imx_drm_panel_format(encoder, imxpd->interface_pix_fmt);
}
@@ -170,6 +175,10 @@ static void imx_pd_encoder_mode_set(struct drm_encoder *encoder,
static void imx_pd_encoder_disable(struct drm_encoder *encoder)
{
+ struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
+
+ if (regulator_disable(imxpd->disp_reg))
+ dev_err(imxpd->dev, "Failed to disable regulator.\n");
}
static struct drm_connector_funcs imx_pd_connector_funcs = {
@@ -267,6 +276,10 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
if (ret)
return ret;
+ imxpd->disp_reg = devm_regulator_get(dev, "display");
+ if (IS_ERR(imxpd->disp_reg))
+ return PTR_ERR(imxpd->disp_reg);
+
dev_set_drvdata(dev, imxpd);
return 0;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list