[PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings

[Kishon Vijay Abraham I]

Felipe,

On Thursday 06 March 2014 08:08 PM, Roger Quadros wrote:
> The dra7-usb2 and am437-usb2 bindings have not yet been used.
> Change them to be more elegant.
>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> ---
>   Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++--

Here too..
Acked-by: Kishon Vijay Abraham I <kishon at ti.com>

Regards
Kishon
>   drivers/phy/phy-omap-control.c                   | 4 ++--
>   2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
> index 5c5b1b0..28e674b 100644
> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
> @@ -9,9 +9,9 @@ Required properties:
>                           e.g. USB2_PHY on OMAP5.
>    "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
>                           e.g. USB3 PHY and SATA PHY on OMAP5.
> - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
> + "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on
>                           DRA7 platform.
> - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
> + "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on
>                           AM437 platform.
>    - reg : Address and length of the register set for the device. It contains
>      the address of "otghs_control" for control-phy-otghs or "power" register
> diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
> index 17fc200..a7e2d7f 100644
> --- a/drivers/phy/phy-omap-control.c
> +++ b/drivers/phy/phy-omap-control.c
> @@ -228,11 +228,11 @@ static const struct of_device_id omap_control_phy_id_table[] = {
>   		.data = &pipe3_data,
>   	},
>   	{
> -		.compatible = "ti,control-phy-dra7usb2",
> +		.compatible = "ti,control-phy-dra7-usb2",
>   		.data = &dra7usb2_data,
>   	},
>   	{
> -		.compatible = "ti,control-phy-am437usb2",
> +		.compatible = "ti,control-phy-am437-usb2",
>   		.data = &am437usb2_data,
>   	},
>   	{},
>