[PATCH 1/2] imx-drm: imx-ldb: Add drm_panel support
Philipp Zabel
p.zabel at pengutronix.de
Thu Mar 6 08:54:39 EST 2014
This patch allows to optionally attach the lvds-channel to a panel
supported by a drm_panel driver instead of supplying the modes via
device tree.
Before:
ldb {
...
lvds-channel at 0 {
...
display-timings {
native-timing = <&timing1>;
timing1: etm0700g0dh6 {
hactive = <800>;
vactive = <480>;
clock-frequency = <33260000>;
hsync-len = <128>;
hback-porch = <88>;
hfront-porch = <40>;
vsync-len = <2>;
vback-porch = <33>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
...
};
};
...
};
};
After:
ldb {
...
lvds-channel at 0 {
fsl,panel = <&panel>;
...
};
};
panel: panel {
compatible = "edt,etm0700g0dh6", "simple-panel";
};
Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
drivers/staging/imx-drm/imx-ldb.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/staging/imx-drm/imx-ldb.c b/drivers/staging/imx-drm/imx-ldb.c
index 4576830..38a0795 100644
--- a/drivers/staging/imx-drm/imx-ldb.c
+++ b/drivers/staging/imx-drm/imx-ldb.c
@@ -24,6 +24,7 @@
#include <drm/drmP.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of_address.h>
@@ -60,6 +61,7 @@ struct imx_ldb_channel {
struct imx_ldb *ldb;
struct drm_connector connector;
struct drm_encoder encoder;
+ struct drm_panel *panel;
struct device_node *child;
int chno;
void *edid;
@@ -96,6 +98,13 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector)
struct imx_ldb_channel *imx_ldb_ch = con_to_imx_ldb_ch(connector);
int num_modes = 0;
+ if (imx_ldb_ch->panel && imx_ldb_ch->panel->funcs &&
+ imx_ldb_ch->panel->funcs->get_modes) {
+ num_modes = imx_ldb_ch->panel->funcs->get_modes(imx_ldb_ch->panel);
+ if (num_modes > 0)
+ return num_modes;
+ }
+
if (imx_ldb_ch->edid) {
drm_mode_connector_update_edid_property(connector,
imx_ldb_ch->edid);
@@ -240,6 +249,8 @@ static void imx_ldb_encoder_commit(struct drm_encoder *encoder)
}
regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl);
+
+ drm_panel_enable(imx_ldb_ch->panel);
}
static void imx_ldb_encoder_mode_set(struct drm_encoder *encoder,
@@ -291,6 +302,8 @@ static void imx_ldb_encoder_disable(struct drm_encoder *encoder)
(ldb->ldb_ctrl & LDB_CH1_MODE_EN_MASK) == 0)
return;
+ drm_panel_disable(imx_ldb_ch->panel);
+
if (imx_ldb_ch == &ldb->channel[0])
ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK;
else if (imx_ldb_ch == &ldb->channel[1])
@@ -376,6 +389,9 @@ static int imx_ldb_register(struct drm_device *drm,
drm_connector_init(drm, &imx_ldb_ch->connector,
&imx_ldb_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
+ if (imx_ldb_ch->panel)
+ drm_panel_attach(imx_ldb_ch->panel, &imx_ldb_ch->connector);
+
drm_mode_connector_attach_encoder(&imx_ldb_ch->connector,
&imx_ldb_ch->encoder);
@@ -490,6 +506,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
for_each_child_of_node(np, child) {
struct imx_ldb_channel *channel;
+ struct device_node *panel_node;
ret = of_property_read_u32(child, "reg", &i);
if (ret || i < 0 || i > 1)
@@ -549,6 +566,10 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
return -EINVAL;
}
+ panel_node = of_parse_phandle(child, "fsl,panel", 0);
+ if (panel_node)
+ channel->panel = of_drm_find_panel(panel_node);
+
ret = imx_ldb_register(drm, channel);
if (ret)
return ret;
--
1.9.0
More information about the linux-arm-kernel
mailing list