[PATCH 5/7] ARM: dts: imx6: add PCIe interrupt mapping properties

[Shawn Guo]

On Fri, Feb 28, 2014 at 06:28:41PM +0100, Lucas Stach wrote:
> As defined by the common PCI bindings.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> ---
>  arch/arm/boot/dts/imx6qdl.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index fb28b2ecb1db..db3339e7d3a2 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -10,6 +10,8 @@
>   * http://www.gnu.org/copyleft/gpl.html
>   */
>  
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
>  #include "skeleton.dtsi"
>  
>  / {
> @@ -126,7 +128,16 @@
>  				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
>  				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
>  			num-lanes = <1>;
> +

Please drop these blank lines between properties.

Shawn

>  			interrupts = <0 123 0x04>;
> +
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0 0 0 0x7>;
> +			interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> +			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
> +			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> +
>  			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
>  			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
>  			status = "disabled";
> -- 
> 1.8.5.3
>