[PATCH 00/12] ARM: OMAP: SATA support for OMAP5 & DRA7
Roger Quadros
rogerq at ti.com
Mon Mar 3 10:07:22 EST 2014
Hi,
This series adds SATA support for OMAP5 uevm and DRA7-evm boards.
- Cleans up the ti-pipe3 PHY driver
- Adds SATA DPLL support to ti-pipe3 PHY driver
- Adds SATA nodes to hwmod and SoC DT data
Patches are based on [1].
To test SATA you will also need [2].
[1] - http://article.gmane.org/gmane.linux.kernel/1658825
[2] - http://article.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/7285
cheers,
-roger
---
Balaji T K (2):
ARM: dts: omap5: add sata node
ARM: dts: dra7: add OCP2SCP3 and SATA nodes
Keshava Munegowda (1):
ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
Kishon Vijay Abraham I (1):
phy: rename struct omap_control_usb to struct omap_control_phy
Nikhil Devshatwar (1):
ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods
Roger Quadros (7):
phy: omap-control: Update DT binding information
phy: ti-pipe3: cleanup clock handling
ARM: dts: omap5: Add clocks to usb3_phy node
phy: ti-pipe3: Add SATA DPLL support
phy: omap: Select OMAP_OCP2SCP bus driver
phy: ti-pipe3: streamline PHY operations
phy: ti-pipe3: Fix suspend/resume and module reload
Documentation/devicetree/bindings/phy/ti-phy.txt | 28 +-
Documentation/devicetree/bindings/usb/omap-usb.txt | 24 --
arch/arm/boot/dts/dra7.dtsi | 39 +++
arch/arm/boot/dts/omap5.dtsi | 42 +++
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 +++++
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 41 ++-
drivers/phy/Kconfig | 16 +-
drivers/phy/Makefile | 1 +
drivers/phy/phy-omap-control.c | 320 +++++++++++++++++++++
drivers/phy/phy-omap-usb2.c | 8 +-
drivers/phy/phy-ti-pipe3.c | 257 ++++++++++-------
drivers/usb/musb/omap2430.c | 2 +-
drivers/usb/phy/Kconfig | 10 -
drivers/usb/phy/Makefile | 1 -
drivers/usb/phy/phy-omap-control.c | 319 --------------------
include/linux/phy/omap_control_phy.h | 89 ++++++
include/linux/usb/omap_control_usb.h | 89 ------
17 files changed, 798 insertions(+), 561 deletions(-)
create mode 100644 drivers/phy/phy-omap-control.c
delete mode 100644 drivers/usb/phy/phy-omap-control.c
create mode 100644 include/linux/phy/omap_control_phy.h
delete mode 100644 include/linux/usb/omap_control_usb.h
--
1.8.3.2
More information about the linux-arm-kernel
mailing list