[RESEND Patch 4/9] ARM: dts: OMAP36xx: Add device node for ABB

[Mugunthan V N]

From: "Andrii.Tseglytskyi" <andrii.tseglytskyi at ti.com>

Add ABB device node for OMAP36xx family of devices. Data is based on
OMAP36XX Technical Reference Manual revision AB (Dec 2012).

[nm at ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm at ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi at ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
---
 arch/arm/boot/dts/omap36xx.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 7e8dee9..ba077cd 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -39,6 +39,26 @@
 			clock-frequency = <48000000>;
 		};
 
+		abb_mpu_iva: regulator-abb-mpu {
+			compatible = "ti,abb-v1";
+			regulator-name = "abb_mpu_iva";
+			#address-cell = <0>;
+			#size-cells = <0>;
+			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+			reg-names = "base-address", "int-address";
+			ti,tranxdone-status-mask = <0x4000000>;
+			clocks = <&sys_ck>;
+			ti,settling-time = <30>;
+			ti,clock-cycles = <8>;
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1012500		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1325000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			>;
+		};
+
 		omap3_pmx_core2: pinmux at 480025a0 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x480025a0 0x5c>;
-- 
1.9.0