[Patch v8 2/2] dmaengine: add Qualcomm BAM dma driver
Joe Perches
joe at perches.com
Mon Mar 3 01:49:12 EST 2014
On Mon, 2014-03-03 at 00:30 -0600, Andy Gross wrote:
> Add the DMA engine driver for the QCOM Bus Access Manager (BAM) DMA controller
> found in the MSM 8x74 platforms.
>
> Each BAM DMA device is associated with a specific on-chip peripheral. Each
> channel provides a uni-directional data transfer engine that is capable of
> transferring data between the peripheral and system memory (System mode), or
> between two peripherals (BAM2BAM).
[]
trivia:
> +static u32 process_channel_irqs(struct bam_device *bdev)
> +{
[]
> + for (i = 0; i < bdev->num_channels; i++) {
> + struct bam_chan *bchan = &bdev->channels[i];
> + if (srcs & BIT(i)) {
> + /* clear pipe irq */
> + pipe_stts = readl_relaxed(bdev->regs +
> + BAM_P_IRQ_STTS(i));
> +
> + writel_relaxed(pipe_stts, bdev->regs +
> + BAM_P_IRQ_CLR(i));
> +
> + spin_lock_irqsave(&bchan->vc.lock, flags);
> + async_desc = bchan->curr_txd;
> +
> + if (async_desc) {
> + async_desc->num_desc -= async_desc->xfer_len;
> + async_desc->curr_desc += async_desc->xfer_len;
> + bchan->curr_txd = NULL;
> +
> + /* manage FIFO */
> + bchan->head += async_desc->xfer_len;
> + bchan->head %= MAX_DESCRIPTORS;
> +
> + /*
> + * if complete, process cookie. Otherwise
> + * push back to front of desc_issued so that
> + * it gets restarted by the tasklet
> + */
> + if (!async_desc->num_desc)
> + vchan_cookie_complete(&async_desc->vd);
> + else
> + list_add(&async_desc->vd.node,
> + &bchan->vc.desc_issued);
> + }
> +
> + spin_unlock_irqrestore(&bchan->vc.lock, flags);
> + }
> + }
This could be written with fewer indents using continue
(and maybe faster using ffs too)
for (i = 0; i < bdev->num_channels; i++) {
struct bam_chan *bchan;
if (!(srcs & BIT(i)))
continue;
bchan = &bdev->channels[i];
/* clear pipe irq */
pipe_stts = readl_relaxed(bdev->regs + BAM_P_IRQ_STTS(i));
writel_relaxed(pipe_stts, bdev->regs + BAM_P_IRQ_CLR(i));
etc...
More information about the linux-arm-kernel
mailing list