[PATCH 5/5] ARM: dts: imx6sx-sdb: Add audio support

Fabio Estevam festevam at gmail.com
Mon Jun 30 22:55:29 PDT 2014


From: Fabio Estevam <fabio.estevam at freescale.com>

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/boot/dts/imx6sx-sdb.dts | 72 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 2571261..a3980d9 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -82,9 +82,39 @@
 			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
+
+		reg_psu_5v: regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "PSU-5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
 	};
 };
 
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
@@ -200,6 +230,31 @@
 	};
 };
 
+&i2c4 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c4>;
+        status = "okay";
+
+	codec: wm8962 at 1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&ssi2 {
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -260,6 +315,16 @@
 
 &iomuxc {
 	imx6x-sdb {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
 		pinctrl_enet1: enet1grp {
 			fsl,pins = <
 				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
@@ -293,6 +358,13 @@
 			>;
 		};
 
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+			>;
+		};
+
 		pinctrl_vcc_sd3: vccsd3grp {
 			fsl,pins = <
 				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-- 
1.8.3.2




More information about the linux-arm-kernel mailing list