[PATCH] ARM: dts: Add TMU dt node to monitor the temperature for Exynos3250

[Chanwoo Choi]

Hi Sachin,

On 07/01/2014 12:33 PM, Sachin Kamat wrote:
> Hi Chanwoo,
> 
> On Tue, Jul 1, 2014 at 6:10 AM, Chanwoo Choi <cw00.choi at samsung.com> wrote:
>> This patch add TMU (Thermal Management Unit) dt node to monitor the high
>> temperature for Exynos3250.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>> This patch has a dependency on following patch [1]:
>>  [1] https://lkml.org/lkml/2014/6/30/805
>>
>>  arch/arm/boot/dts/exynos3250.dtsi | 10 ++++++++++
>>  1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>> index 3660cab..1e566af 100644
>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>> @@ -192,6 +192,16 @@
>>                         status = "disabled";
>>                 };
>>
>> +               tmu: tmu at 100C0000 {
>> +                       compatible = "samsung,exynos3250-tmu";
>> +                       interrupt-parent = <&gic>;
>> +                       reg = <0x100C0000 0x100>;
>> +                       interrupts = <0 216 0>;
>> +                       clocks = <&cmu CLK_TMU_APBIF>;
>> +                       clock-names = "tmu_apbif";
>> +                       status = "disabled";
> 
> I don't think there would be any board specific properties needed. Hence
> leave the status as enabled (by deleting the above line).
> 

I think that if specific board need TMU feature, dts file for specific board
should include tmu dt node with 'okay' status. The specific board based on
Exynos3250 might not need TMU feature.

Best Regards,
Chanwoo Choi