[PATCH 1/4] ARM: shmobile: r8a7790: add internal PCI bridge nodes

[Simon Horman]

From: Ben Dooks <ben.dooks at codethink.co.uk>

Add device nodes for the R8A7790 internal PCI bridge devices.

Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton at codethink.co.uk>
[Sergei: added several properties to the PCI bridge nodes]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 994330e..373d9a21 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -930,6 +930,66 @@
 		status = "disabled";
 	};
 
+	pci0: pci at ee090000 {
+		compatible = "renesas,pci-r8a7790";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0 0xee090000 0 0xc00>,
+		      <0 0xee080000 0 0x1100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+			      	 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+			      	 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pci1: pci at ee0b0000 {
+		compatible = "renesas,pci-r8a7790";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0 0xee0b0000 0 0xc00>,
+		      <0 0xee0a0000 0 0x1100>;
+		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <1 1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+			      	 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+			      	 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pci2: pci at ee0d0000 {
+		compatible = "renesas,pci-r8a7790";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0 0xee0d0000 0 0xc00>,
+		      <0 0xee0c0000 0 0x1100>;
+		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <2 2>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+			      	 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+			      	 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	pciec: pcie at fe000000 {
 		compatible = "renesas,pcie-r8a7790";
 		reg = <0 0xfe000000 0 0x80000>;
-- 
2.0.0.rc2