[PATCH] s3cmci: Move to clk_prepare_enable/clk_disable_unprepare
Vasily Khoruzhick
anarsoul at gmail.com
Mon Jun 30 12:11:06 PDT 2014
Use clk_prepare_enable/clk_disable_unprepare to make the driver
work properly with common clock framework.
Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
drivers/mmc/host/s3cmci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 0d115a8..e5516a2 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1707,7 +1707,7 @@ static int s3cmci_probe(struct platform_device *pdev)
goto probe_free_dma;
}
- ret = clk_enable(host->clk);
+ ret = clk_prepare_enable(host->clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable clock source.\n");
goto clk_free;
@@ -1765,7 +1765,7 @@ static int s3cmci_probe(struct platform_device *pdev)
s3cmci_cpufreq_deregister(host);
free_dmabuf:
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
clk_free:
clk_put(host->clk);
@@ -1817,7 +1817,7 @@ static void s3cmci_shutdown(struct platform_device *pdev)
s3cmci_debugfs_remove(host);
s3cmci_cpufreq_deregister(host);
mmc_remove_host(mmc);
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
}
static int s3cmci_remove(struct platform_device *pdev)
--
2.0.0
More information about the linux-arm-kernel
mailing list