[PATCH v2 1/2] ARM: topology: Use a clock if possible to get the CPU frequency

[Vincent Guittot]

On 30 June 2014 16:01, Maxime Ripard <maxime.ripard at free-electrons.com> wrote:
> On Mon, Jun 30, 2014 at 03:27:21PM +0200, Vincent Guittot wrote:
>> >> >> -             rate = of_get_property(cn, "clock-frequency", &len);
>> >> >> -             if (!rate || len != 4) {
>> >> >> -                     pr_err("%s missing clock-frequency property\n",
>> >> >> -                             cn->full_name);
>> >> >> +             clk = of_clk_get(cn, 0);
>> >> >> +             if (!IS_ERR(clk))
>> >> >> +                     rate = clk_get_rate(clk);
>> >>
>> >> We need the max frequency as it will be used to weight the different
>> >> CPUs capacity. How do you ensure that the current clock rate is the
>> >> max one ?
>> >
>> > Hmm, the clock-frequency attribute in the ePAPR is defined at the
>> > current CPU frequency, not the max one.
>>
>> What means current frequency in device tree when DVFS is involved ?
>
> The ePAPR states that clock-frequency is supposed to be "the current
> clock speed of the CPU in Hertz". It's exactly what my patch add.
>
> Now, you're right, DVFS would be an issue here with clock-frequency,
> but this patch actually makes it easier to deal with, since you only
> get a reference to a clock, and you can get its rate at any given
> time.

and what about using clk_round_rate(clk, ULONG_MAX) ?

We will not be dependent of when we parse DT

Vincent


>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com