[PATCH v2 10/14] drivers: clk: st: STiH407: Support for clockgenC0

[Mark Rutland]

On Fri, Jun 27, 2014 at 02:25:07PM +0100, Gabriel FERNANDEZ wrote:
> The patch added support for DT registration of ClockGenC0
> It includes 2 c32 type PLL and a 660 Quadfs.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez at linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau at st.com>
> Acked-by: Peter Griffin <peter.griffin at linaro.org>
> ---
>  drivers/clk/st/clkgen-fsyn.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/st/clkgen-pll.c  | 32 ++++++++++++++++++++++++++++++
>  2 files changed, 79 insertions(+)
> 
> diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
> index b2b73f4..0e0d5f9 100644
> --- a/drivers/clk/st/clkgen-fsyn.c
> +++ b/drivers/clk/st/clkgen-fsyn.c
> @@ -255,6 +255,49 @@ static const struct clkgen_quadfs_data st_fs660c32_F_416 = {
>  	.get_rate	= clk_fs660c32_dig_get_rate,
>  };
>  
> +static const struct clkgen_quadfs_data st_fs660c32_C_407 = {
> +	.nrst_present = true,
> +	.nrst	= { CLKGEN_FIELD(0x2f0, 0x1, 0),
> +		    CLKGEN_FIELD(0x2f0, 0x1, 1),
> +		    CLKGEN_FIELD(0x2f0, 0x1, 2),
> +		    CLKGEN_FIELD(0x2f0, 0x1, 3) },
> +	.npda	= CLKGEN_FIELD(0x2f0, 0x1, 12),
> +	.nsb	= { CLKGEN_FIELD(0x2f0, 0x1, 8),
> +		    CLKGEN_FIELD(0x2f0, 0x1, 9),
> +		    CLKGEN_FIELD(0x2f0, 0x1, 10),
> +		    CLKGEN_FIELD(0x2f0, 0x1, 11) },
> +	.nsdiv_present = true,
> +	.nsdiv	= { CLKGEN_FIELD(0x304, 0x1, 24),
> +		    CLKGEN_FIELD(0x308, 0x1, 24),
> +		    CLKGEN_FIELD(0x30c, 0x1, 24),
> +		    CLKGEN_FIELD(0x310, 0x1, 24) },
> +	.mdiv	= { CLKGEN_FIELD(0x304, 0x1f, 15),
> +		    CLKGEN_FIELD(0x308, 0x1f, 15),
> +		    CLKGEN_FIELD(0x30c, 0x1f, 15),
> +		    CLKGEN_FIELD(0x310, 0x1f, 15) },
> +	.en	= { CLKGEN_FIELD(0x2fc, 0x1, 0),
> +		    CLKGEN_FIELD(0x2fc, 0x1, 1),
> +		    CLKGEN_FIELD(0x2fc, 0x1, 2),
> +		    CLKGEN_FIELD(0x2fc, 0x1, 3) },
> +	.ndiv	= CLKGEN_FIELD(0x2f4, 0x7, 16),
> +	.pe	= { CLKGEN_FIELD(0x304, 0x7fff, 0),
> +		    CLKGEN_FIELD(0x308, 0x7fff, 0),
> +		    CLKGEN_FIELD(0x30c, 0x7fff, 0),
> +		    CLKGEN_FIELD(0x310, 0x7fff, 0) },
> +	.sdiv	= { CLKGEN_FIELD(0x304, 0xf, 20),
> +		    CLKGEN_FIELD(0x308, 0xf, 20),
> +		    CLKGEN_FIELD(0x30c, 0xf, 20),
> +		    CLKGEN_FIELD(0x310, 0xf, 20) },
> +	.lockstatus_present = true,
> +	.lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
> +	.powerup_polarity = 1,
> +	.standby_polarity = 1,
> +	.pll_ops	= &st_quadfs_pll_c32_ops,
> +	.rtbl		= fs660c32_rtbl,
> +	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
> +	.get_rate	= clk_fs660c32_dig_get_rate,
> +};
> +
>  /**
>   * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
>   *
> @@ -938,6 +981,10 @@ static struct of_device_id quadfs_of_match[] = {
>  		.compatible = "st,stih416-quadfs660-F",
>  		.data = (void *)&st_fs660c32_F_416
>  	},
> +	{
> +		.compatible = "st,stih407-quadfs660-C",
> +		.data = (void *)&st_fs660c32_C_407

Surely a (void*) cast isn't necessary?

Mark.