[PATCH/RESEND 0/9] drm: tilcdc driver fixes

[Rob Clark]

On Fri, Jun 27, 2014 at 6:08 PM, Darren Etheridge <detheridge at ti.com> wrote:
> Guido,
>
>
> On 06/17/2014 09:17 AM, Guido Martínez wrote:
>>
>> The tilcdc driver could be compiled as a module, but was severely broken
>> and could not be used as such. This patchset attempts to fix the issues
>> preventing a proper load/unload of the module.
>>
>> Issues included dangling sysfs nodes, dangling devices, memory leaks and
>> a double kfree.
>>
>> It now seems to be working ok. We have tested this by loading and
>> unloading the driver repeteadly, with both panel and slave connectors
>> and found no flaws.
>>
>> There is still one warning left on tilcdc_crtc_destroy, caused by
>> destroying the connector while still in an ON status. We don't know why
>> this happens or why it's an issue, so we did not fix it.
>>
>
> Yes I see what you mean, it triggers the WARN_ON in tilcdc_crtc_destroy
> because DRM_MODE_DPMS_ON is still set.  This WARN_ON does make some sense
> because DPMS_OFF would have the effect of turning off clocks and putting the
> monitor to sleep which seems logical considering we have torn down the
> display.  Adding a tilcdc_crtc_dpms(DPMS_OFF) right before the WARN_ON
> confirms this, but it seems strange that this hasn't happened automatically
> (+ Russell doesn't need to do it in his Armada driver) - so I suspect there
> is a better way.

tbh, I'm not entirely sure offhand why drm_mode_config_cleanup()
doesn't remove the fb's first (which should have the effect of
shutting down any lit crtc/encoder/connector)..  that would seem like
the sensible way to shut down..

BR,
-R

> Otherwise I think this is a good and useful patch series.
>
> Darren
>
>
>> The first 7 patches are bug fixes which and should probably be applied
>> in the stable trees. The last two are clean-ups.
>>
>>
>> Resending this since I got no replies.
>>
>>
>> Guido Martínez (9):
>>    drm/i2c: tda998x: move drm_i2c_encoder_destroy call
>>    drm/tilcdc: panel: fix dangling sysfs connector node
>>    drm/tilcdc: slave: fix dangling sysfs connector node
>>    drm/tilcdc: tfp410: fix dangling sysfs connector node
>>    drm/tilcdc: panel: fix leak when unloading the module
>>    drm/tilcdc: fix release order on exit
>>    drm/tilcdc: fix double kfree
>>    drm/tilcdc: remove submodule destroy calls
>>    drm/tilcdc: replace late_initcall with module_init
>>
>>   drivers/gpu/drm/i2c/tda998x_drv.c      |  2 +-
>>   drivers/gpu/drm/tilcdc/Module.symvers  |  0
>>   drivers/gpu/drm/tilcdc/tilcdc_drv.c    | 15 +++++--------
>>   drivers/gpu/drm/tilcdc/tilcdc_drv.h    |  1 -
>>   drivers/gpu/drm/tilcdc/tilcdc_panel.c  | 39
>> +++++++++++++++++-----------------
>>   drivers/gpu/drm/tilcdc/tilcdc_slave.c  | 27 +++++++++++++----------
>>   drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 35
>> +++++++++++++++---------------
>>   7 files changed, 59 insertions(+), 60 deletions(-)
>>   create mode 100644 drivers/gpu/drm/tilcdc/Module.symvers
>>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel