[PATCH v9 04/11] seccomp: add "seccomp" syscall
Kees Cook
keescook at chromium.org
Fri Jun 27 16:22:53 PDT 2014
This adds the new "seccomp" syscall with both an "operation" and "flags"
parameter for future expansion. The third argument is a pointer value,
used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must
be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...).
In addition to the TSYNC flag later in this patch series, there is a
non-zero chance that this syscall could be used for configuring a fixed
argument area for seccomp-tracer-aware processes to pass syscall arguments
in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter"
for this syscall. Additionally, this syscall uses operation, flags,
and user pointer for arguments because strictly passing arguments via
a user pointer would mean seccomp itself would be unable to trivially
filter the seccomp syscall itself.
Signed-off-by: Kees Cook <keescook at chromium.org>
---
arch/Kconfig | 1 +
arch/x86/syscalls/syscall_32.tbl | 1 +
arch/x86/syscalls/syscall_64.tbl | 1 +
include/linux/syscalls.h | 2 ++
include/uapi/asm-generic/unistd.h | 4 ++-
include/uapi/linux/seccomp.h | 4 +++
kernel/seccomp.c | 55 +++++++++++++++++++++++++++++++++----
kernel/sys_ni.c | 3 ++
8 files changed, 65 insertions(+), 6 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig
index 97ff872c7acc..0eae9df35b88 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -321,6 +321,7 @@ config HAVE_ARCH_SECCOMP_FILTER
- secure_computing is called from a ptrace_event()-safe context
- secure_computing return value is checked and a return value of -1
results in the system call being skipped immediately.
+ - seccomp syscall wired up
config SECCOMP_FILTER
def_bool y
diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/syscalls/syscall_32.tbl
index d6b867921612..7527eac24122 100644
--- a/arch/x86/syscalls/syscall_32.tbl
+++ b/arch/x86/syscalls/syscall_32.tbl
@@ -360,3 +360,4 @@
351 i386 sched_setattr sys_sched_setattr
352 i386 sched_getattr sys_sched_getattr
353 i386 renameat2 sys_renameat2
+354 i386 seccomp sys_seccomp
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
index ec255a1646d2..16272a6c12b7 100644
--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/syscalls/syscall_64.tbl
@@ -323,6 +323,7 @@
314 common sched_setattr sys_sched_setattr
315 common sched_getattr sys_sched_getattr
316 common renameat2 sys_renameat2
+317 common seccomp sys_seccomp
#
# x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index b0881a0ed322..1713977ee26f 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -866,4 +866,6 @@ asmlinkage long sys_process_vm_writev(pid_t pid,
asmlinkage long sys_kcmp(pid_t pid1, pid_t pid2, int type,
unsigned long idx1, unsigned long idx2);
asmlinkage long sys_finit_module(int fd, const char __user *uargs, int flags);
+asmlinkage long sys_seccomp(unsigned int op, unsigned int flags,
+ const char __user *uargs);
#endif
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index 333640608087..65acbf0e2867 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -699,9 +699,11 @@ __SYSCALL(__NR_sched_setattr, sys_sched_setattr)
__SYSCALL(__NR_sched_getattr, sys_sched_getattr)
#define __NR_renameat2 276
__SYSCALL(__NR_renameat2, sys_renameat2)
+#define __NR_seccomp 277
+__SYSCALL(__NR_seccomp, sys_seccomp)
#undef __NR_syscalls
-#define __NR_syscalls 277
+#define __NR_syscalls 278
/*
* All syscalls below here should go away really,
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
index ac2dc9f72973..b258878ba754 100644
--- a/include/uapi/linux/seccomp.h
+++ b/include/uapi/linux/seccomp.h
@@ -10,6 +10,10 @@
#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */
#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */
+/* Valid operations for seccomp syscall. */
+#define SECCOMP_SET_MODE_STRICT 0
+#define SECCOMP_SET_MODE_FILTER 1
+
/*
* All BPF programs must return a 32-bit value.
* The bottom 16-bits are for optional return data.
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 812cea2e7ffb..2f83496d6016 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -18,6 +18,7 @@
#include <linux/compat.h>
#include <linux/sched.h>
#include <linux/seccomp.h>
+#include <linux/syscalls.h>
/* #define SECCOMP_DEBUG 1 */
@@ -314,7 +315,7 @@ free_prog:
*
* Returns 0 on success and non-zero otherwise.
*/
-static long seccomp_attach_user_filter(char __user *user_filter)
+static long seccomp_attach_user_filter(const char __user *user_filter)
{
struct sock_fprog fprog;
long ret = -EFAULT;
@@ -517,6 +518,7 @@ out:
#ifdef CONFIG_SECCOMP_FILTER
/**
* seccomp_set_mode_filter: internal function for setting seccomp filter
+ * @flags: flags to change filter behavior
* @filter: struct sock_fprog containing filter
*
* This function may be called repeatedly to install additional filters.
@@ -527,11 +529,16 @@ out:
*
* Returns 0 on success or -EINVAL on failure.
*/
-static long seccomp_set_mode_filter(char __user *filter)
+static long seccomp_set_mode_filter(unsigned int flags,
+ const char __user *filter)
{
const unsigned long seccomp_mode = SECCOMP_MODE_FILTER;
long ret = -EINVAL;
+ /* Validate flags. */
+ if (flags != 0)
+ goto out;
+
if (!seccomp_check_mode(seccomp_mode))
goto out;
@@ -544,12 +551,35 @@ out:
return ret;
}
#else
-static inline long seccomp_set_mode_filter(char __user *filter)
+static inline long seccomp_set_mode_filter(unsigned int flags,
+ const char __user *filter)
{
return -EINVAL;
}
#endif
+/* Common entry point for both prctl and syscall. */
+static long do_seccomp(unsigned int op, unsigned int flags,
+ const char __user *uargs)
+{
+ switch (op) {
+ case SECCOMP_SET_MODE_STRICT:
+ if (flags != 0 || uargs != NULL)
+ return -EINVAL;
+ return seccomp_set_mode_strict();
+ case SECCOMP_SET_MODE_FILTER:
+ return seccomp_set_mode_filter(flags, uargs);
+ default:
+ return -EINVAL;
+ }
+}
+
+SYSCALL_DEFINE3(seccomp, unsigned int, op, unsigned int, flags,
+ const char __user *, uargs)
+{
+ return do_seccomp(op, flags, uargs);
+}
+
/**
* prctl_set_seccomp: configures current->seccomp.mode
* @seccomp_mode: requested mode to use
@@ -559,12 +589,27 @@ static inline long seccomp_set_mode_filter(char __user *filter)
*/
long prctl_set_seccomp(unsigned long seccomp_mode, char __user *filter)
{
+ unsigned int op;
+ char __user *uargs;
+
switch (seccomp_mode) {
case SECCOMP_MODE_STRICT:
- return seccomp_set_mode_strict();
+ op = SECCOMP_SET_MODE_STRICT;
+ /*
+ * Setting strict mode through prctl always ignored filter,
+ * so make sure it is always NULL here to pass the internal
+ * check in do_seccomp().
+ */
+ uargs = NULL;
+ break;
case SECCOMP_MODE_FILTER:
- return seccomp_set_mode_filter(filter);
+ op = SECCOMP_SET_MODE_FILTER;
+ uargs = filter;
+ break;
default:
return -EINVAL;
}
+
+ /* prctl interface doesn't have flags, so they are always zero. */
+ return do_seccomp(op, 0, uargs);
}
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 36441b51b5df..2904a2105914 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -213,3 +213,6 @@ cond_syscall(compat_sys_open_by_handle_at);
/* compare kernel pointers */
cond_syscall(sys_kcmp);
+
+/* operate on Secure Computing state */
+cond_syscall(sys_seccomp);
--
1.7.9.5
More information about the linux-arm-kernel
mailing list