[PATCH v2 1/2] usb: chipidea: zynq: Add device tree binding information

[Sergei Shtylyov]

Hello.

On 06/27/2014 03:23 PM, Punnaiah Choudary Kalluri wrote:

> Document device tree binding information as required by
> the ZYNQ USB controller.

> Signed-off-by: Punnaiah Choudary Kalluri <punnaia at xilinx.com>
[...]

> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
> new file mode 100644
> index 0000000..54bb3b4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
> @@ -0,0 +1,23 @@
> +Xilinx Zynq usb controller based on synopsys usb IP(v2.20a)

    s/usb/USB/.

> +
> +Required properties:
> +- compatible:   should contain "xlnx,zynq-usb-2.20a"
> +- clocks:       clock provider specifier
> +- reg:          offset and length of the register set in the memory map
> +- interrupt-parent: the phandle for the interrupt controller that services
> +                    interrupts for this device.

    This property has never been required -- it can be inherited from the 
upper level node.

WBR, Sergei