[STLinux Kernel] [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65
Gabriel Fernandez
gabriel.fernandez at linaro.org
Fri Jun 27 04:50:11 PDT 2014
On 5 June 2014 13:13, Peter Griffin <peter.griffin at linaro.org> wrote:
> Hi Gabi,
>
> See my comment below
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> This patch extend the range of possible frequencies of the fs432c65
>> and fs660c32 Quad frequency synthesizers.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez at linaro.org>
>> ---
>> drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
>> 1 file changed, 57 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
>> index d7a0341..97a422f 100644
>> --- a/drivers/clk/st/clkgen-fsyn.c
>> +++ b/drivers/clk/st/clkgen-fsyn.c
>> @@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
>> };
>>
>> static struct stm_fs fs432c65_rtbl[] = {
>> - { .mdiv = 0x1f, .pe = 0x0, .sdiv = 0x7, .nsdiv = 0 }, /* 625 Khz */
>> - { .mdiv = 0x11, .pe = 0x1c72, .sdiv = 0x2, .nsdiv = 1 }, /* 108 MHz */
>> - { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x0, .nsdiv = 1 }, /* 297 MHz */
>> + { .mdiv = 0x1f, .pe = 0x0, .sdiv = 0x7, .nsdiv = 0 }, /* 625 Khz */
>> + { .mdiv = 0x13, .pe = 0x777c, .sdiv = 0x4, .nsdiv = 1 }, /* 25.175 MHz */
>> + { .mdiv = 0x19, .pe = 0x4d35, .sdiv = 0x2, .nsdiv = 0 }, /* 25.200 MHz */
>> + { .mdiv = 0x11, .pe = 0x1c72, .sdiv = 0x4, .nsdiv = 1 }, /* 27.000 MHz */
>> + { .mdiv = 0x17, .pe = 0x28f5, .sdiv = 0x2, .nsdiv = 0 }, /* 27.027 MHz */
>> + { .mdiv = 0x16, .pe = 0x3359, .sdiv = 0x2, .nsdiv = 0 }, /* 28.320 MHz */
>> + { .mdiv = 0x1f, .pe = 0x2083, .sdiv = 0x3, .nsdiv = 1 }, /* 30.240 MHz */
>> + { .mdiv = 0x1e, .pe = 0x430d, .sdiv = 0x3, .nsdiv = 1 }, /* 31.500 MHz */
>> + { .mdiv = 0x17, .pe = 0x0, .sdiv = 0x3, .nsdiv = 1 }, /* 40.000 MHz */
>> + { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x1, .nsdiv = 0 }, /* 49.500 MHz */
>> + { .mdiv = 0x13, .pe = 0x6667, .sdiv = 0x3, .nsdiv = 1 }, /* 50.000 MHz */
>> + { .mdiv = 0x10, .pe = 0x1ee6, .sdiv = 0x3, .nsdiv = 1 }, /* 57.284 MHz */
>> + { .mdiv = 0x1d, .pe = 0x3b14, .sdiv = 0x2, .nsdiv = 1 }, /* 65.000 MHz */
>> + { .mdiv = 0x12, .pe = 0x7c65, .sdiv = 0x1, .nsdiv = 0 }, /* 71.000 MHz */
>> + { .mdiv = 0x19, .pe = 0xecd, .sdiv = 0x2, .nsdiv = 1 }, /* 74.176 MHz */
>> + { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x2, .nsdiv = 1 }, /* 74.250 MHz */
>> + { .mdiv = 0x19, .pe = 0x3334, .sdiv = 0x2, .nsdiv = 1 }, /* 75.000 MHz */
>> + { .mdiv = 0x18, .pe = 0x5138, .sdiv = 0x2, .nsdiv = 1 }, /* 78.800 MHz */
>> + { .mdiv = 0x1d, .pe = 0x77d, .sdiv = 0x0, .nsdiv = 0 }, /* 85.500 MHz */
>> + { .mdiv = 0x1c, .pe = 0x13d5, .sdiv = 0x0, .nsdiv = 0 }, /* 88.750 MHz */
>> + { .mdiv = 0x11, .pe = 0x1c72, .sdiv = 0x2, .nsdiv = 1 }, /* 108.000 MHz */
>> + { .mdiv = 0x17, .pe = 0x28f5, .sdiv = 0x0, .nsdiv = 0 }, /* 108.108 MHz */
>> + { .mdiv = 0x10, .pe = 0x6e26, .sdiv = 0x2, .nsdiv = 1 }, /* 118.963 MHz */
>> + { .mdiv = 0x15, .pe = 0x3e63, .sdiv = 0x0, .nsdiv = 0 }, /* 119.000 MHz */
>> + { .mdiv = 0x1c, .pe = 0x471d, .sdiv = 0x1, .nsdiv = 1 }, /* 135.000 MHz */
>> + { .mdiv = 0x19, .pe = 0xecd, .sdiv = 0x1, .nsdiv = 1 }, /* 148.352 MHz */
>> + { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x1, .nsdiv = 1 }, /* 148.500 MHz */
>> + { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x0, .nsdiv = 1 }, /* 297 MHz */
>> };
>>
>> static struct stm_fs fs660c32_rtbl[] = {
>> - { .mdiv = 0x01, .pe = 0x2aaa, .sdiv = 0x8, .nsdiv = 0 }, /* 600 KHz */
>> - { .mdiv = 0x02, .pe = 0x3d33, .sdiv = 0x0, .nsdiv = 0 }, /* 148.5 Mhz */
>> - { .mdiv = 0x13, .pe = 0x5bcc, .sdiv = 0x0, .nsdiv = 1 }, /* 297 Mhz */
>> - { .mdiv = 0x0e, .pe = 0x1025, .sdiv = 0x0, .nsdiv = 1 }, /* 333 Mhz */
>> - { .mdiv = 0x0b, .pe = 0x715f, .sdiv = 0x0, .nsdiv = 1 }, /* 350 Mhz */
>> + { .mdiv = 0x14, .pe = 0x376b, .sdiv = 0x4, .nsdiv = 1 }, /* 25.175 MHz */
>> + { .mdiv = 0x14, .pe = 0x30c3, .sdiv = 0x4, .nsdiv = 1 }, /* 25.200 MHz */
>> + { .mdiv = 0x10, .pe = 0x71c7, .sdiv = 0x4, .nsdiv = 1 }, /* 27.000 MHz */
>> + { .mdiv = 0x00, .pe = 0x47af, .sdiv = 0x3, .nsdiv = 0 }, /* 27.027 MHz */
>> + { .mdiv = 0x0e, .pe = 0x4e1a, .sdiv = 0x4, .nsdiv = 1 }, /* 28.320 MHz */
>> + { .mdiv = 0x0b, .pe = 0x534d, .sdiv = 0x4, .nsdiv = 1 }, /* 30.240 MHz */
>> + { .mdiv = 0x17, .pe = 0x6fbf, .sdiv = 0x2, .nsdiv = 0 }, /* 31.500 MHz */
>> + { .mdiv = 0x01, .pe = 0x0, .sdiv = 0x4, .nsdiv = 1 }, /* 40.000 MHz */
>> + { .mdiv = 0x15, .pe = 0x2aab, .sdiv = 0x3, .nsdiv = 1 }, /* 49.500 MHz */
>> + { .mdiv = 0x14, .pe = 0x6666, .sdiv = 0x3, .nsdiv = 1 }, /* 50.000 MHz */
>> + { .mdiv = 0x1d, .pe = 0x395f, .sdiv = 0x1, .nsdiv = 0 }, /* 57.284 MHz */
>> + { .mdiv = 0x08, .pe = 0x4ec5, .sdiv = 0x3, .nsdiv = 1 }, /* 65.000 MHz */
>> + { .mdiv = 0x05, .pe = 0x1770, .sdiv = 0x3, .nsdiv = 1 }, /* 71.000 MHz */
>> + { .mdiv = 0x03, .pe = 0x4ba7, .sdiv = 0x3, .nsdiv = 1 }, /* 74.176 MHz */
>> + { .mdiv = 0x0f, .pe = 0x3426, .sdiv = 0x1, .nsdiv = 0 }, /* 74.250 MHz */
>> + { .mdiv = 0x0e, .pe = 0x7777, .sdiv = 0x1, .nsdiv = 0 }, /* 75.000 MHz */
>> + { .mdiv = 0x01, .pe = 0x4053, .sdiv = 0x3, .nsdiv = 1 }, /* 78.800 MHz */
>> + { .mdiv = 0x09, .pe = 0x15b5, .sdiv = 0x1, .nsdiv = 0 }, /* 85.500 MHz */
>> + { .mdiv = 0x1b, .pe = 0x3f19, .sdiv = 0x2, .nsdiv = 1 }, /* 88.750 MHz */
>> + { .mdiv = 0x10, .pe = 0x71c7, .sdiv = 0x2, .nsdiv = 1 }, /* 108.000 MHz */
>> + { .mdiv = 0x00, .pe = 0x47af, .sdiv = 0x1, .nsdiv = 0 }, /* 108.108 MHz */
>> + { .mdiv = 0x0c, .pe = 0x3118, .sdiv = 0x2, .nsdiv = 1 }, /* 118.963 MHz */
>> + { .mdiv = 0x0c, .pe = 0x2f54, .sdiv = 0x2, .nsdiv = 1 }, /* 119.000 MHz */
>> + { .mdiv = 0x07, .pe = 0xe39, .sdiv = 0x2, .nsdiv = 1 }, /* 135.000 MHz */
>> + { .mdiv = 0x03, .pe = 0x4ba7, .sdiv = 0x2, .nsdiv = 1 }, /* 148.352 MHz */
>> + { .mdiv = 0x0f, .pe = 0x3426, .sdiv = 0x0, .nsdiv = 0 }, /* 148.500 MHz */
>> + { .mdiv = 0x03, .pe = 0x4ba7, .sdiv = 0x1, .nsdiv = 1 }, /* 296.704 MHz */
>> + { .mdiv = 0x03, .pe = 0x471c, .sdiv = 0x1, .nsdiv = 1 }, /* 297 MHz */
>> + { .mdiv = 0x1c, .pe = 0x0, .sdiv = 0x0, .nsdiv = 1 }, /* 352 Mhz */
>> };
>
> These lookup tables should be 'static const'
>
Done
Thanks Peter
> Once fixed:
> Acked-by: Peter Griffin <peter.griffin at linaro.org>
>
> Regards,
>
> Peter.
More information about the linux-arm-kernel
mailing list