[PATCH v5 12/14] clk: max77802: Add DT binding documentation

[Andreas Färber]

Am 26.06.2014 20:15, schrieb Javier Martinez Canillas:
> Add Device Tree binding documentation for the clocks
> outputs in the Maxim 77802 Power Management IC.
> 
> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
> ---
> 
> Changes since v4: None
> 
> Changes since v3:
>  - Don't use the same clock driver name in clock-names since it's a consumer
>    concept and most probably will be different. Suggested by Doug Anderson.
> 
> Changes since v2:
>  - Split the DT binding documentation in a separate patch.
> 
>  .../devicetree/bindings/clock/maxim,max77802.txt   | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> new file mode 100644
> index 0000000..26bc4f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> @@ -0,0 +1,42 @@
> +Binding for Maxim MAX77802 32k clock generator block
> +
> +This is a part of device tree bindings of MAX77802 multi-function device.
> +More information can be found in bindings/mfd/max77802.txt file.
> +
> +The MAX77802 contains two 32.768khz clock outputs that can be controlled
> +(gated/ungated) over I2C.
> +
> +Following properties should be presend in main device node of the MFD chip.

"present"

Regards,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg