[PATCH V5 2/3] Documentation: gpio: Add APM X-Gene SoC GPIO controller DTS binding

[Feng Kan]

Documentation for APM X-Gene SoC GPIO controller DTS binding.

Signed-off-by: Feng Kan <fkan at apm.com>
Reviewed-by: Alexandre Courbot <acourbot at nvidia.com>
---
 .../devicetree/bindings/gpio/gpio-xgene.txt          | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-xgene.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
new file mode 100644
index 0000000..bd5fd85
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
@@ -0,0 +1,20 @@
+APM X-Gene SoC GPIO controller bindings
+
+This is a gpio controller that is part of the flash controller.
+This gpio controller controls a total of 48 gpios.
+
+Required properties:
+- compatible: "apm,xgene-gpio" for X-Gene GPIO controller
+- reg: Physical base address and size of the controller's registers
+- #gpio-cells: Should be two.
+	- first cell is the pin number
+	- second cell is used to specify optional parameters (unused)
+- gpio-controller: Marks the device node as a GPIO controller.
+
+Example:
+	gpio0: gpio0 at 1701c000 {
+		compatible = "apm,xgene-gpio";
+		reg = <0x0 0x1701c000 0x0 0x40>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
-- 
1.9.1