[PATCH v4 07/14] mfd: Add driver for Maxim 77802 Power Management IC
Krzysztof Kozlowski
k.kozlowski at samsung.com
Thu Jun 26 02:31:33 PDT 2014
Hi,
Just a few nit-picks below but overall everything looks fine:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
On śro, 2014-06-25 at 21:03 +0200, Javier Martinez Canillas wrote:
> Maxim MAX77802 is a power management chip that contains 10 high
> efficiency Buck regulators, 32 Low-dropout (LDO) regulators used
> to power up application processors and peripherals, a 2-channel
> 32kHz clock outputs, a Real-Time-Clock (RTC) and a I2C interface
> to program the individual regulators, clocks outputs and the RTC.
>
> This patch adds the core support for MAX77802 PMIC and is based
> on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
(...)
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index f001487..e795bfe 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> +obj-$(CONFIG_MFD_MAX77802) += max77802.o
> obj-$(CONFIG_MFD_MAX8907) += max8907.o
> max8925-objs := max8925-core.o max8925-i2c.o
> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c
> new file mode 100644
> index 0000000..3d477fb
> --- /dev/null
> +++ b/drivers/mfd/max77802.c
> @@ -0,0 +1,366 @@
> +/*
> + * max77802.c - mfd core driver for the Maxim 77802
> + *
> + * Copyright (C) 2013-2014 Google, Inc
> + * Simon Glass <sjg at chromium.org>
> + *
> + * Copyright (C) 2012 Samsung Electronics
> + * Chiwoong Byun <woong.byun at smasung.com>
> + * Jonghwa Lee <jonghwa3.lee at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * This driver is based on max8997.c
> + */
> +
> +#include <linux/export.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/module.h>
> +#include <linux/mfd/core.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/mfd/max77802.h>
> +#include <linux/mfd/max77802-private.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/err.h>
> +
> +static const struct mfd_cell max77802_devs[] = {
> + { .name = "max77802-pmic", },
> + { .name = "max77802-clk", },
> + { .name = "max77802-rtc", },
> +};
> +
> +static bool max77802_pmic_is_accessible_reg(struct device *dev,
> + unsigned int reg)
> +{
> + return (reg >= MAX77802_REG_DEVICE_ID && reg < MAX77802_REG_PMIC_END);
> +}
> +
> +static bool max77802_rtc_is_accessible_reg(struct device *dev,
> + unsigned int reg)
> +{
> + return (reg >= MAX77802_RTC_INT && reg < MAX77802_RTC_END);
> +}
> +
> +static bool max77802_is_accessible_reg(struct device *dev, unsigned int reg)
> +{
> + return (max77802_pmic_is_accessible_reg(dev, reg) ||
> + max77802_rtc_is_accessible_reg(dev, reg));
> +}
> +
> +static bool max77802_pmic_is_precious_reg(struct device *dev, unsigned int reg)
> +{
> + return (reg == MAX77802_REG_INTSRC || reg == MAX77802_REG_INT1 ||
> + reg == MAX77802_REG_INT2);
> +}
> +
> +static bool max77802_rtc_is_precious_reg(struct device *dev, unsigned int reg)
> +{
> + return (reg == MAX77802_RTC_INT ||
> + reg == MAX77802_RTC_UPDATE0 ||
> + reg == MAX77802_RTC_UPDATE1);
> +}
> +
> +static bool max77802_is_precious_reg(struct device *dev, unsigned int reg)
> +{
> + return (max77802_pmic_is_precious_reg(dev, reg) ||
> + max77802_rtc_is_precious_reg(dev, reg));
> +}
> +
> +static bool max77802_pmic_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + return (max77802_is_precious_reg(dev, reg) ||
> + reg == MAX77802_REG_STATUS1 || reg == MAX77802_REG_STATUS2 ||
> + reg == MAX77802_REG_PWRON);
> +}
> +
> +static bool max77802_rtc_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + return (max77802_rtc_is_precious_reg(dev, reg) ||
> + reg == MAX77802_RTC_SEC ||
> + reg == MAX77802_RTC_MIN ||
> + reg == MAX77802_RTC_HOUR ||
> + reg == MAX77802_RTC_WEEKDAY ||
> + reg == MAX77802_RTC_MONTH ||
> + reg == MAX77802_RTC_YEAR ||
> + reg == MAX77802_RTC_DATE);
> +}
> +
> +static bool max77802_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + return (max77802_pmic_is_volatile_reg(dev, reg) ||
> + max77802_rtc_is_volatile_reg(dev, reg));
> +}
> +
> +static struct regmap_config max77802_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .writeable_reg = max77802_is_accessible_reg,
> + .readable_reg = max77802_is_accessible_reg,
> + .precious_reg = max77802_is_precious_reg,
> + .volatile_reg = max77802_is_volatile_reg,
> + .name = "max77802-pmic",
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static const struct regmap_irq max77802_irqs[] = {
> + /* INT1 interrupts */
> + { .reg_offset = 0, .mask = MAX77802_INT1_PWRONF_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_INT1_PWRONR_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_INT1_JIGONBF_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_INT1_JIGONBR_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_INT1_ACOKBF_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_INT1_ACOKBR_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_INT1_ONKEY1S_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_INT1_MRSTB_MSK, },
> + /* INT2 interrupts */
> + { .reg_offset = 1, .mask = MAX77802_INT2_140C_MSK, },
> + { .reg_offset = 1, .mask = MAX77802_INT2_120C_MSK, },
> +};
> +
> +static const struct regmap_irq_chip max77802_irq_chip = {
> + .name = "max77802-pmic",
> + .status_base = MAX77802_REG_INT1,
> + .mask_base = MAX77802_REG_INT1MSK,
> + .num_regs = 2,
> + .irqs = max77802_irqs,
> + .num_irqs = ARRAY_SIZE(max77802_irqs),
> +};
> +
> +static const struct regmap_irq max77802_rtc_irqs[] = {
> + /* RTC interrupts */
> + { .reg_offset = 0, .mask = MAX77802_RTCINT_RTC60S_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_RTCINT_RTCA1_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_RTCINT_RTCA2_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_RTCINT_SMPL_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_RTCINT_RTC1S_MSK, },
> + { .reg_offset = 0, .mask = MAX77802_RTCINT_WTSR_MSK, },
> +};
> +
> +static const struct regmap_irq_chip max77802_rtc_irq_chip = {
> + .name = "max77802-rtc",
> + .status_base = MAX77802_RTC_INT,
> + .mask_base = MAX77802_RTC_INTM,
> + .num_regs = 1,
> + .irqs = max77802_rtc_irqs,
> + .num_irqs = ARRAY_SIZE(max77802_rtc_irqs),
> +};
> +
> +#ifdef CONFIG_OF
> +static struct of_device_id max77802_pmic_dt_match[] = {
> + {.compatible = "maxim,max77802", .data = NULL},
> + {},
> +};
> +
> +static void max77802_dt_parse_dvs_gpio(struct device *dev,
> + struct max77802_platform_data *pd,
> + struct device_node *np)
> +{
> + int i;
> +
> + /*
> + * NOTE: we don't consider GPIO errors fatal; board may have some lines
> + * directly pulled high or low and thus doesn't specify them.
> + */
> + for (i = 0; i < ARRAY_SIZE(pd->buck_gpio_dvs); i++)
> + pd->buck_gpio_dvs[i] =
> + devm_gpiod_get_index(dev, "max77802,pmic-buck-dvs", i);
> +
> + for (i = 0; i < ARRAY_SIZE(pd->buck_gpio_selb); i++)
> + pd->buck_gpio_selb[i] =
> + devm_gpiod_get_index(dev, "max77802,pmic-buck-selb", i);
> +}
> +
> +static struct max77802_platform_data *max77802_i2c_parse_dt_pdata(struct device
> + *dev)
> +{
> + struct device_node *np = dev->of_node;
> + struct max77802_platform_data *pd;
> +
> + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
> + if (!pd)
> + return NULL;
> +
> + /* Read default index and ignore errors, since default is 0 */
> + of_property_read_u32(np, "max77802,pmic-buck-default-dvs-idx",
> + &pd->buck_default_idx);
> +
> + max77802_dt_parse_dvs_gpio(dev, pd, np);
> +
> + dev->platform_data = pd;
> + return pd;
> +}
> +#else
> +static struct max77802_platform_data *max77802_i2c_parse_dt_pdata(struct device
> + *dev)
> +{
> + return 0;
> +}
> +#endif
> +
> +static int max77802_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct max77802_dev *max77802 = NULL;
> + struct max77802_platform_data *pdata = dev_get_platdata(&i2c->dev);
> + unsigned int data;
> + int ret = 0;
> +
> + if (i2c->dev.of_node)
> + pdata = max77802_i2c_parse_dt_pdata(&i2c->dev);
> +
> + if (!pdata) {
> + dev_err(&i2c->dev, "No platform data found.\n");
> + return -EIO;
> + }
> +
> + max77802 = devm_kzalloc(&i2c->dev, sizeof(struct max77802_dev),
> + GFP_KERNEL);
> + if (max77802 == NULL)
It is inconsistent. Before you used "(!pd)" and "(!pdata)" so maybe
stick to one format?
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, max77802);
> +
> + max77802->dev = &i2c->dev;
> + max77802->i2c = i2c;
> + max77802->type = id->driver_data;
> +
> + max77802->wakeup = pdata->wakeup;
> + max77802->irq = i2c->irq;
> +
> + max77802->regmap = devm_regmap_init_i2c(i2c, &max77802_regmap_config);
> + if (IS_ERR(max77802->regmap)) {
> + ret = PTR_ERR(max77802->regmap);
> + dev_err(max77802->dev, "Failed to allocate register map: %d\n",
> + ret);
> + return ret;
> + }
> +
> + if (regmap_read(max77802->regmap,
> + MAX77802_REG_DEVICE_ID, &data) < 0) {
> + dev_err(max77802->dev,
> + "device not found on this channel\n");
> + return -ENODEV;
> + }
> +
> + ret = regmap_add_irq_chip(max77802->regmap, max77802->irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
> + IRQF_SHARED, 0, &max77802_irq_chip,
> + &max77802->irq_data);
> + if (ret != 0) {
> + dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);
> + return ret;
> + }
> + ret = regmap_add_irq_chip(max77802->regmap, max77802->irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
> + IRQF_SHARED, 0, &max77802_rtc_irq_chip,
> + &max77802->rtc_irq_data);
> + if (ret != 0) {
> + dev_err(&i2c->dev, "failed to add RTC irq chip: %d\n", ret);
> + goto err_del_irqc;
> + }
> +
> + ret = mfd_add_devices(max77802->dev, -1, max77802_devs,
> + ARRAY_SIZE(max77802_devs), NULL, 0, NULL);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
> + goto err_del_rtc_irqc;
> + }
> +
> + return 0;
> +
> +err_del_rtc_irqc:
> + regmap_del_irq_chip(max77802->irq, max77802->rtc_irq_data);
> +err_del_irqc:
> + regmap_del_irq_chip(max77802->irq, max77802->irq_data);
> + return ret;
> +}
> +
> +static int max77802_i2c_remove(struct i2c_client *i2c)
> +{
> + struct max77802_dev *max77802 = i2c_get_clientdata(i2c);
> +
> + mfd_remove_devices(max77802->dev);
> +
> + regmap_del_irq_chip(max77802->irq, max77802->rtc_irq_data);
> + regmap_del_irq_chip(max77802->irq, max77802->irq_data);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id max77802_i2c_id[] = {
> + { "max77802", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max77802_i2c_id);
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int max77802_suspend(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77802_dev *max77802 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(max77802->irq);
> +
> + disable_irq(max77802->irq);
Can you add short comment why this is needed? I know why but just for
future generations which will wonder: "why do we need to disable the IRQ
while suspending?" :). Especially that this is rather a workaround for
issue in other driver (I2C bus).
> +
> + return 0;
> +}
> +
> +static int max77802_resume(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77802_dev *max77802 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(max77802->irq);
> +
> + enable_irq(max77802->irq);
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static SIMPLE_DEV_PM_OPS(max77802_pm, max77802_suspend, max77802_resume);
> +
> +static struct i2c_driver max77802_i2c_driver = {
> + .driver = {
> + .name = "max77802",
> + .owner = THIS_MODULE,
> + .pm = &max77802_pm,
> + .of_match_table = of_match_ptr(max77802_pmic_dt_match),
> + },
> + .probe = max77802_i2c_probe,
> + .remove = max77802_i2c_remove,
> + .id_table = max77802_i2c_id,
> +};
> +
> +static int __init max77802_i2c_init(void)
> +{
> + return i2c_add_driver(&max77802_i2c_driver);
> +}
> +/* init early so consumer devices can complete system boot */
> +subsys_initcall(max77802_i2c_init);
> +
> +static void __exit max77802_i2c_exit(void)
> +{
> + i2c_del_driver(&max77802_i2c_driver);
> +}
> +module_exit(max77802_i2c_exit);
> +
> +MODULE_DESCRIPTION("MAXIM 77802 multi-function core driver");
> +MODULE_AUTHOR("Simon Glass <sjg at chromium.org>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/max77802-private.h b/include/linux/mfd/max77802-private.h
> new file mode 100644
> index 0000000..7539ab4
> --- /dev/null
> +++ b/include/linux/mfd/max77802-private.h
> @@ -0,0 +1,307 @@
> +/*
> + * max77802-private.h - Voltage regulator driver for the Maxim 77802
> + *
> + * Copyright (C) 2012 Samsung Electrnoics
> + * Chiwoong Byun <woong.byun at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __LINUX_MFD_MAX77802_PRIV_H
> +#define __LINUX_MFD_MAX77802_PRIV_H
> +
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/module.h>
> +
> +#define MAX77802_REG_INVALID (0xff)
> +
> +enum max77802_pmic_reg {
> + MAX77802_REG_DEVICE_ID = 0x00,
> + MAX77802_REG_INTSRC = 0x01,
> + MAX77802_REG_INT1 = 0x02,
> + MAX77802_REG_INT2 = 0x03,
> +
> + MAX77802_REG_INT1MSK = 0x04,
> + MAX77802_REG_INT2MSK = 0x05,
> +
> + MAX77802_REG_STATUS1 = 0x06,
> + MAX77802_REG_STATUS2 = 0x07,
> +
> + MAX77802_REG_PWRON = 0x08,
> + /* Reserved: 0x09 */
> + MAX77802_REG_MRSTB = 0x0A,
> + MAX77802_REG_EPWRHOLD = 0x0B,
> + /* Reserved: 0x0C-0x0D */
> + MAX77802_REG_BOOSTCTRL = 0x0E,
> + MAX77802_REG_BOOSTOUT = 0x0F,
> +
> + MAX77802_REG_BUCK1CTRL = 0x10,
> + MAX77802_REG_BUCK1DVS1 = 0x11,
> + MAX77802_REG_BUCK1DVS2 = 0x12,
> + MAX77802_REG_BUCK1DVS3 = 0x13,
> + MAX77802_REG_BUCK1DVS4 = 0x14,
> + MAX77802_REG_BUCK1DVS5 = 0x15,
> + MAX77802_REG_BUCK1DVS6 = 0x16,
> + MAX77802_REG_BUCK1DVS7 = 0x17,
> + MAX77802_REG_BUCK1DVS8 = 0x18,
> + /* Reserved: 0x19 */
> + MAX77802_REG_BUCK2CTRL1 = 0x1A,
> + MAX77802_REG_BUCK2CTRL2 = 0x1B,
> + MAX77802_REG_BUCK2PHTRAN = 0x1C,
> + MAX77802_REG_BUCK2DVS1 = 0x1D,
> + MAX77802_REG_BUCK2DVS2 = 0x1E,
> + MAX77802_REG_BUCK2DVS3 = 0x1F,
> + MAX77802_REG_BUCK2DVS4 = 0x20,
> + MAX77802_REG_BUCK2DVS5 = 0x21,
> + MAX77802_REG_BUCK2DVS6 = 0x22,
> + MAX77802_REG_BUCK2DVS7 = 0x23,
> + MAX77802_REG_BUCK2DVS8 = 0x24,
> + /* Reserved: 0x25-0x26 */
> + MAX77802_REG_BUCK3CTRL1 = 0x27,
> + MAX77802_REG_BUCK3DVS1 = 0x28,
> + MAX77802_REG_BUCK3DVS2 = 0x29,
> + MAX77802_REG_BUCK3DVS3 = 0x2A,
> + MAX77802_REG_BUCK3DVS4 = 0x2B,
> + MAX77802_REG_BUCK3DVS5 = 0x2C,
> + MAX77802_REG_BUCK3DVS6 = 0x2D,
> + MAX77802_REG_BUCK3DVS7 = 0x2E,
> + MAX77802_REG_BUCK3DVS8 = 0x2F,
> + /* Reserved: 0x30-0x36 */
> + MAX77802_REG_BUCK4CTRL1 = 0x37,
> + MAX77802_REG_BUCK4DVS1 = 0x38,
> + MAX77802_REG_BUCK4DVS2 = 0x39,
> + MAX77802_REG_BUCK4DVS3 = 0x3A,
> + MAX77802_REG_BUCK4DVS4 = 0x3B,
> + MAX77802_REG_BUCK4DVS5 = 0x3C,
> + MAX77802_REG_BUCK4DVS6 = 0x3D,
> + MAX77802_REG_BUCK4DVS7 = 0x3E,
> + MAX77802_REG_BUCK4DVS8 = 0x3F,
> + /* Reserved: 0x40 */
> + MAX77802_REG_BUCK5CTRL = 0x41,
> + MAX77802_REG_BUCK5OUT = 0x42,
> + /* Reserved: 0x43 */
> + MAX77802_REG_BUCK6CTRL = 0x44,
> + MAX77802_REG_BUCK6DVS1 = 0x45,
> + MAX77802_REG_BUCK6DVS2 = 0x46,
> + MAX77802_REG_BUCK6DVS3 = 0x47,
> + MAX77802_REG_BUCK6DVS4 = 0x48,
> + MAX77802_REG_BUCK6DVS5 = 0x49,
> + MAX77802_REG_BUCK6DVS6 = 0x4A,
> + MAX77802_REG_BUCK6DVS7 = 0x4B,
> + MAX77802_REG_BUCK6DVS8 = 0x4C,
> + /* Reserved: 0x4D */
> + MAX77802_REG_BUCK7CTRL = 0x4E,
> + MAX77802_REG_BUCK7OUT = 0x4F,
> + /* Reserved: 0x50 */
> + MAX77802_REG_BUCK8CTRL = 0x51,
> + MAX77802_REG_BUCK8OUT = 0x52,
> + /* Reserved: 0x53 */
> + MAX77802_REG_BUCK9CTRL = 0x54,
> + MAX77802_REG_BUCK9OUT = 0x55,
> + /* Reserved: 0x56 */
> + MAX77802_REG_BUCK10CTRL = 0x57,
> + MAX77802_REG_BUCK10OUT = 0x58,
> +
> + /* Reserved: 0x59-0x5F */
> +
> + MAX77802_REG_LDO1CTRL1 = 0x60,
> + MAX77802_REG_LDO2CTRL1 = 0x61,
> + MAX77802_REG_LDO3CTRL1 = 0x62,
> + MAX77802_REG_LDO4CTRL1 = 0x63,
> + MAX77802_REG_LDO5CTRL1 = 0x64,
> + MAX77802_REG_LDO6CTRL1 = 0x65,
> + MAX77802_REG_LDO7CTRL1 = 0x66,
> + MAX77802_REG_LDO8CTRL1 = 0x67,
> + MAX77802_REG_LDO9CTRL1 = 0x68,
> + MAX77802_REG_LDO10CTRL1 = 0x69,
> + MAX77802_REG_LDO11CTRL1 = 0x6A,
> + MAX77802_REG_LDO12CTRL1 = 0x6B,
> + MAX77802_REG_LDO13CTRL1 = 0x6C,
> + MAX77802_REG_LDO14CTRL1 = 0x6D,
> + MAX77802_REG_LDO15CTRL1 = 0x6E,
> + /* Reserved: 0x6F */
> + MAX77802_REG_LDO17CTRL1 = 0x70,
> + MAX77802_REG_LDO18CTRL1 = 0x71,
> + MAX77802_REG_LDO19CTRL1 = 0x72,
> + MAX77802_REG_LDO20CTRL1 = 0x73,
> + MAX77802_REG_LDO21CTRL1 = 0x74,
> + MAX77802_REG_LDO22CTRL1 = 0x75,
> + MAX77802_REG_LDO23CTRL1 = 0x76,
> + MAX77802_REG_LDO24CTRL1 = 0x77,
> + MAX77802_REG_LDO25CTRL1 = 0x78,
> + MAX77802_REG_LDO26CTRL1 = 0x79,
> + MAX77802_REG_LDO27CTRL1 = 0x7A,
> + MAX77802_REG_LDO28CTRL1 = 0x7B,
> + MAX77802_REG_LDO29CTRL1 = 0x7C,
> + MAX77802_REG_LDO30CTRL1 = 0x7D,
> + /* Reserved: 0x7E */
> + MAX77802_REG_LDO32CTRL1 = 0x7F,
> + MAX77802_REG_LDO33CTRL1 = 0x80,
> + MAX77802_REG_LDO34CTRL1 = 0x81,
> + MAX77802_REG_LDO35CTRL1 = 0x82,
> + /* Reserved: 0x83-0x8F */
> + MAX77802_REG_LDO1CTRL2 = 0x90,
> + MAX77802_REG_LDO2CTRL2 = 0x91,
> + MAX77802_REG_LDO3CTRL2 = 0x92,
> + MAX77802_REG_LDO4CTRL2 = 0x93,
> + MAX77802_REG_LDO5CTRL2 = 0x94,
> + MAX77802_REG_LDO6CTRL2 = 0x95,
> + MAX77802_REG_LDO7CTRL2 = 0x96,
> + MAX77802_REG_LDO8CTRL2 = 0x97,
> + MAX77802_REG_LDO9CTRL2 = 0x98,
> + MAX77802_REG_LDO10CTRL2 = 0x99,
> + MAX77802_REG_LDO11CTRL2 = 0x9A,
> + MAX77802_REG_LDO12CTRL2 = 0x9B,
> + MAX77802_REG_LDO13CTRL2 = 0x9C,
> + MAX77802_REG_LDO14CTRL2 = 0x9D,
> + MAX77802_REG_LDO15CTRL2 = 0x9E,
> + /* Reserved: 0x9F */
> + MAX77802_REG_LDO17CTRL2 = 0xA0,
> + MAX77802_REG_LDO18CTRL2 = 0xA1,
> + MAX77802_REG_LDO19CTRL2 = 0xA2,
> + MAX77802_REG_LDO20CTRL2 = 0xA3,
> + MAX77802_REG_LDO21CTRL2 = 0xA4,
> + MAX77802_REG_LDO22CTRL2 = 0xA5,
> + MAX77802_REG_LDO23CTRL2 = 0xA6,
> + MAX77802_REG_LDO24CTRL2 = 0xA7,
> + MAX77802_REG_LDO25CTRL2 = 0xA8,
> + MAX77802_REG_LDO26CTRL2 = 0xA9,
> + MAX77802_REG_LDO27CTRL2 = 0xAA,
> + MAX77802_REG_LDO28CTRL2 = 0xAB,
> + MAX77802_REG_LDO29CTRL2 = 0xAC,
> + MAX77802_REG_LDO30CTRL2 = 0xAD,
> + /* Reserved: 0xAE */
> + MAX77802_REG_LDO32CTRL2 = 0xAF,
> + MAX77802_REG_LDO33CTRL2 = 0xB0,
> + MAX77802_REG_LDO34CTRL2 = 0xB1,
> + MAX77802_REG_LDO35CTRL2 = 0xB2,
> + /* Reserved: 0xB3 */
> +
> + MAX77802_REG_BBAT_CHG = 0xB4,
> + MAX77802_REG_32KHZ = 0xB5,
> +
> + MAX77802_REG_PMIC_END = 0xB6,
> +};
> +
> +enum max77802_rtc_reg {
> + MAX77802_RTC_INT = 0xC0,
> + MAX77802_RTC_INTM = 0xC1,
> + MAX77802_RTC_CONTROLM = 0xC2,
> + MAX77802_RTC_CONTROL = 0xC3,
> + MAX77802_RTC_UPDATE0 = 0xC4,
> + MAX77802_RTC_UPDATE1 = 0xC5,
> + MAX77802_WTSR_SMPL_CNTL = 0xC6,
> + MAX77802_RTC_SEC = 0xC7,
> + MAX77802_RTC_MIN = 0xC8,
> + MAX77802_RTC_HOUR = 0xC9,
> + MAX77802_RTC_WEEKDAY = 0xCA,
> + MAX77802_RTC_MONTH = 0xCB,
> + MAX77802_RTC_YEAR = 0xCC,
> + MAX77802_RTC_DATE = 0xCD,
> + MAX77802_RTC_AE1 = 0xCE,
> + MAX77802_ALARM1_SEC = 0xCF,
> + MAX77802_ALARM1_MIN = 0xD0,
> + MAX77802_ALARM1_HOUR = 0xD1,
> + MAX77802_ALARM1_WEEKDAY = 0xD2,
> + MAX77802_ALARM1_MONTH = 0xD3,
> + MAX77802_ALARM1_YEAR = 0xD4,
> + MAX77802_ALARM1_DATE = 0xD5,
> + MAX77802_RTC_AE2 = 0xD6,
> + MAX77802_ALARM2_SEC = 0xD7,
> + MAX77802_ALARM2_MIN = 0xD8,
> + MAX77802_ALARM2_HOUR = 0xD9,
> + MAX77802_ALARM2_WEEKDAY = 0xDA,
> + MAX77802_ALARM2_MONTH = 0xDB,
> + MAX77802_ALARM2_YEAR = 0xDC,
> + MAX77802_ALARM2_DATE = 0xDD,
> +
> + MAX77802_RTC_END = 0xDF,
> +};
> +
> +#define MAX77802_IRQSRC_PMIC (0)
Shouldn't it be BIT(0) or BIT(1)? It looks odd.
> +#define MAX77802_IRQSRC_RTC BIT(0)
Anyway, are these defines used anywhere? Seems not.
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list