[PATCH V4 04/16] irqchip: crossbar: Initialise the crossbar with a safe value

[Sricharan R]

From: Nishanth Menon <nm at ti.com>

Since crossbar is s/w configurable, the initial settings of the
crossbar cannot be assumed to be sane. This implies that:
a) On initialization all un-reserved crossbars must be initialized to
   a known 'safe' value.
b) When unmapping the interrupt, the safe value must be written to
   ensure that the crossbar mapping matches with interrupt controller
   usage.

So provide a safe value in the dt data to map if
'0' is not safe for the platform and use it during init and unmap

While at this, fix the below checkpatch warning.
Fixes checkpatch warning:
WARNING: Unnecessary space before function pointer arguments
 #37: FILE: drivers/irqchip/irq-crossbar.c:37:
 +	void (*write) (int, int);

Signed-off-by: Nishanth Menon <nm at ti.com>
Signed-off-by: Sricharan R <r.sricharan at ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
 .../devicetree/bindings/arm/omap/crossbar.txt      |    3 +++
 drivers/irqchip/irq-crossbar.c                     |   19 +++++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index 0795765..5f45c78 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -22,6 +22,9 @@ Optional properties:
   SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
   crossbar. These irqs have a crossbar register, but still cannot be used.
 
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+  when the interrupt controller irq is unused (when not provided, default is 0)
+
 Examples:
 		crossbar_mpu: @4a020000 {
 			compatible = "ti,irq-crossbar";
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index 0533a71..4be30c0 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -23,16 +23,18 @@
 
 /*
  * @int_max: maximum number of supported interrupts
+ * @safe_map: safe default value to initialize the crossbar
  * @irq_map: array of interrupts to crossbar number mapping
  * @crossbar_base: crossbar base address
  * @register_offsets: offsets for each irq number
  */
 struct crossbar_device {
 	uint int_max;
+	uint safe_map;
 	uint *irq_map;
 	void __iomem *crossbar_base;
 	int *register_offsets;
-	void (*write) (int, int);
+	void (*write)(int, int);
 };
 
 static struct crossbar_device *cb;
@@ -88,8 +90,10 @@ static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
 {
 	irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
 
-	if (hw > GIC_IRQ_START)
+	if (hw > GIC_IRQ_START) {
 		cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
+		cb->write(hw - GIC_IRQ_START, cb->safe_map);
+	}
 }
 
 static int crossbar_domain_xlate(struct irq_domain *d,
@@ -214,6 +218,17 @@ static int __init crossbar_of_init(struct device_node *node)
 		reserved += size;
 	}
 
+	of_property_read_u32(node, "ti,irqs-safe-map", &cb->safe_map);
+
+	/* Initialize the crossbar with safe map to start with */
+	for (i = 0; i < max; i++) {
+		if (cb->irq_map[i] == IRQ_RESERVED ||
+		    cb->irq_map[i] == IRQ_SKIP)
+			continue;
+
+		cb->write(i, cb->safe_map);
+	}
+
 	register_routable_domain_ops(&routable_irq_domain_ops);
 	return 0;
 
-- 
1.7.9.5