ARM: SoC fixes
Arnd Bergmann
arnd at arndb.de
Wed Jun 25 11:48:29 PDT 2014
The following changes since commit 21278aeafbfacfd62b3e613525f0c694a029dac1:
ARM: use menuconfig for sub-arch menus (2014-06-17 17:09:48 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/fixes-for-linus
for you to fetch changes up to 6c9d16178870315846faa1f59697b801e3fe0531:
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes (2014-06-25 20:27:15 +0200)
----------------------------------------------------------------
ARM: SoC fixes for 3.16
A new set of bug fixes for 3.16, containing patches for seven platforms:
at91:
- drivers/misc fix for Kconfig PWM symbol
- correction of several values in DT after conversion to CCF
- fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc
imx:
- Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51,
because controller base CD/WP is not working in esdhc driver due to
runtime PM support
- A couple of random ventana gw5xxx board fixes
- Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving
IPUv3 driver out of staging tree
- Fix enet/fec clock selection on imx6sl
- Fix display node on imx53-m53evk board
- A couple of Cubox-i updates from Russell, which were omitted from
the merge window due to dependency
integrator:
- fix an OF-related regression against 3.15
mvebu:
- mvebu (v7)
- Fix broken SoC ID detection
- Select ARM_CPU_SUSPEND for v7
- Remove armada38x compatible string (no users yet)
- Enable Dove SoC in mvebu_v7_defconfig
- kirkwood
- Fix phy-connection-type on GuruPlug board
qcom:
- enable gsbi driver in defconfig
- fix section mismatch warning in serial driver
samsung:
- use WFI macro in platform_do_lowpower because exynos cpuhotplug
includes a hardcoded WFI instruction and it causes compile error
in Thumb-2 mode.
- fix GIC reg sizes for exynos4 SoCs
- remove reset timer counter value during boot and resume for mct
to fix a big jump in printk timestamps
- fix pm code to check cortex-A9 for another exynos SoCs
- don't rely on firmware's secondary_cpu_start for mcpm
sti:
- Ethernet clocks were wrongly defined for STiH415/416 platforms
- STiH416 B2020 revision E DTS file name contained uppercase, change to
lowercase.
----------------------------------------------------------------
Abhilash Kesavan (1):
ARM: EXYNOS: fix pm code to check for cortex A9 rather than the SoC
Alexandre Belloni (5):
ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
ARM: at91/dt: sam9261: correctly define mainck
ARM: at91/dt: define sam9261ek slow crystal frequency
ARM: at91/dt: sam9261: remove slow RC osc
Arnd Bergmann (5):
Merge tag 'sti-fixes-for-v3.16-rc1' of git://git.stlinux.com/devel/kernel/linux-sti into fixes
Merge tag 'samsung-fixes-1' of git://git.kernel.org/.../kgene/linux-samsung into fixes
Merge tag 'imx-fixes-3.16' of git://git.kernel.org/.../shawnguo/linux into fixes
Merge tag 'mvebu-fixes-3.16' of git://git.infradead.org/linux-mvebu into fixes
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
Chirantan Ekbote (1):
clocksource: exynos_mct: Don't reset the counter during boot and resume
Denis Carikli (1):
ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.
Doug Anderson (1):
ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm
Ezequiel Garcia (2):
ARM: mvebu: enable Dove SoC in mvebu_v7_defconfig
ARM: mvebu: Fix broken SoC ID detection
Fabio Estevam (1):
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE
Fugang Duan (2):
ARM: imx6sl: add missing enet clock for imx6sl
ARM: dts: imx6sl: correct the fec ipg clock source
Gregory CLEMENT (1):
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
Kumar Gala (1):
tty: serial: msm: Fix section mismatch warning
Lee Jones (1):
ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
Leela Krishna Amudala (1):
ARM: EXYNOS: Use wfi macro in platform_do_lowpower
Linus Walleij (1):
ARM: integrator: fix OF-related regression
Marek Vasut (2):
ARM: dts: mx5: Fix IPU port node placement
ARM: dts: mx5: Move the display out of soc {} node
Nicolas Ferre (1):
misc: atmel_pwm: fix Kconfig symbols
Peter Griffin (1):
ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6
Philipp Zabel (1):
ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix
Russell King (2):
ARM: dts: cubox-i: add support for PWM-driven front panel LED
ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level
Sascha Hauer (1):
ARM: dts: imx51-babbage: Fix esdhc setup
Sebastian Hesselbarth (1):
ARM: dts: kirkwood: fix phy-connection-type for Guruplug
Srinivas Kandagatla (1):
ARM: multi_v7_defconfig: Add QCOM GSBI driver
Thomas Petazzoni (1):
ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms
Tim Harvey (2):
ARM: dts: imx6: ventana: fix include typo
ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock source
Tomasz Figa (1):
ARM: dts: fix reg sizes of GIC for exynos4
.../devicetree/bindings/arm/armada-38x.txt | 14 ++++++--
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/armada-380.dtsi | 2 +-
arch/arm/boot/dts/armada-385-db.dts | 2 +-
arch/arm/boot/dts/armada-385-rd.dts | 2 +-
arch/arm/boot/dts/armada-385.dtsi | 2 +-
arch/arm/boot/dts/armada-38x.dtsi | 2 +-
arch/arm/boot/dts/at91sam9261.dtsi | 21 ++++--------
arch/arm/boot/dts/at91sam9261ek.dts | 4 +++
arch/arm/boot/dts/at91sam9n12.dtsi | 4 +--
arch/arm/boot/dts/at91sam9x5.dtsi | 4 +--
arch/arm/boot/dts/exynos4.dtsi | 2 +-
arch/arm/boot/dts/imx51-babbage.dts | 10 +++---
.../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 4 +--
arch/arm/boot/dts/imx53-m53evk.dts | 40 ++++++++++------------
arch/arm/boot/dts/imx6dl-hummingboard.dts | 10 ++++++
arch/arm/boot/dts/imx6q-gw51xx.dts | 2 +-
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 27 +++++++++++++++
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 4 +--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-microsom.dtsi | 13 -------
arch/arm/boot/dts/imx6sl.dtsi | 2 +-
.../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 4 +--
arch/arm/boot/dts/stih415.dtsi | 8 ++---
.../{stih416-b2020-revE.dts => stih416-b2020e.dts} | 0
arch/arm/boot/dts/stih416.dtsi | 8 ++---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/configs/mvebu_v7_defconfig | 2 ++
arch/arm/mach-exynos/hotplug.c | 8 +----
arch/arm/mach-exynos/mcpm-exynos.c | 11 +++---
arch/arm/mach-exynos/pm.c | 15 ++++----
arch/arm/mach-imx/clk-imx6sl.c | 1 +
arch/arm/mach-integrator/integrator_ap.c | 26 ++++----------
arch/arm/mach-integrator/integrator_cp.c | 23 ++++---------
arch/arm/mach-mvebu/Kconfig | 2 ++
drivers/clocksource/exynos_mct.c | 9 ++---
drivers/misc/Kconfig | 2 +-
drivers/tty/serial/msm_serial.c | 2 +-
include/dt-bindings/clock/imx6sl-clock.h | 3 +-
include/dt-bindings/clock/stih415-clks.h | 1 +
include/dt-bindings/clock/stih416-clks.h | 1 +
43 files changed, 158 insertions(+), 147 deletions(-)
More information about the linux-arm-kernel
mailing list