[PATCH 9/9] ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs

[Suman Anna]

The legacy-style definition of the hwmod addr space is no longer
required as AM33xx/AM43xx are DT-boot only, and the minimal mailbox
DT nodes have been added, so clean up this data.

Cc: Paul Walmsley <paul at pwsan.com>
Signed-off-by: Suman Anna <s-anna at ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index e2db378..8f5989d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -317,21 +317,11 @@ struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x480C8000,
-		.pa_end		= 0x480C8000 + (SZ_4K - 1),
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4 ls -> mailbox */
 struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_mailbox_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mailbox_addrs,
 	.user		= OCP_USER_MPU,
 };
 
-- 
2.0.0