[PATCH v3] ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi
Doug Anderson
dianders at chromium.org
Tue Jun 24 09:28:52 PDT 2014
This adds cros_ec to exynos5420-peach-pit and exynos5800-peach-pi,
including:
* The keyboard
* The i2c tunnel
* The tps65090 under the i2c tunnel
* The battery under the i2c tunnel
To add extra motivation, it should be noted that tps65090 is one of
the things needed to get display-related FETs turned on for pit and
pi.
Note that this relies on a few outstanding changes:
* Needs (spi: s3c64xx: fix broken "cs_gpios" usage in the driver) and
(spi: s3c64xx: for DT platofrms always get the chipselect info from
DT node) to work properly and match the documented bindings. See
<https://patchwork.kernel.org/patch/4346701/> and
<https://patchwork.kernel.org/patch/4346711/>
Signed-off-by: Doug Anderson <dianders at chromium.org>
Tested-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
Tested-by: Tushar Behera <tushar.b at samsung.com>
---
Changes in v3:
- Added aliases for tps65090 regulators as per Tushar.
Changes in v2:
- Now just one patch since mfd patch landed.
- Rebased to ToT linux-next
arch/arm/boot/dts/exynos5420-peach-pit.dts | 145 +++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 145 +++++++++++++++++++++++++++++
2 files changed, 290 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 7649982..b2f1237 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -25,6 +25,11 @@
"google,pit", "google,peach","samsung,exynos5420",
"samsung,exynos5";
+ aliases {
+ /* Assign 20 so we don't get confused w/ builtin ones */
+ i2c20 = "/spi at 12d40000/cros-ec at 0/i2c-tunnel";
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
@@ -87,6 +92,13 @@
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
};
+
+ vbat: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&dp {
@@ -231,6 +243,20 @@
samsung,pin-drv = <0>;
};
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
dp_hpd_gpio: dp_hpd_gpio {
samsung,pins = "gpx2-6";
samsung,pin-function = <0>;
@@ -247,6 +273,19 @@
};
&pinctrl_3 {
+ /* Drive SPI lines at x2 for better integrity */
+ spi2-bus {
+ samsung,pin-drv = <2>;
+ };
+
+ /* Drive SPI chip select at x2 for better integrity */
+ ec_spi_cs: ec-spi-cs {
+ samsung,pins = "gpb1-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
usb300_vbus_en: usb300-vbus-en {
samsung,pins = "gph0-0";
samsung,pin-function = <1>;
@@ -266,6 +305,111 @@
status = "okay";
};
+&spi_2 {
+ status = "okay";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ cs-gpios = <&gpb1 2 0>;
+
+ cros_ec: cros-ec at 0 {
+ compatible = "google,cros-ec-spi";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_spi_cs &ec_irq>;
+ reg = <0>;
+ spi-max-frequency = <3125000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <1>;
+ };
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ google,remote-bus = <0>;
+
+ battery: sbs-battery at b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ sbs,i2c-retry-count = <2>;
+ };
+
+ power-regulator at 48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ tps65090_dcdc1: dcdc1 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc2: dcdc2 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc3: dcdc3 {
+ ti,enable-ext-control;
+ };
+ tps65090_fet1: fet1 {
+ regulator-name = "vcd_led";
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ };
+ tps65090_fet3: fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ };
+ tps65090_fet4: fet4 {
+ regulator-name = "sdcard";
+ regulator-always-on;
+ };
+ tps65090_fet5: fet5 {
+ regulator-name = "camout";
+ };
+ tps65090_fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ };
+ tps65090_ldo1: ldo1 {
+ };
+ tps65090_ldo2: ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
+ };
+ };
+};
+
&uart_3 {
status = "okay";
};
@@ -287,3 +431,4 @@
timeout-sec = <32>;
};
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 2c2c137..5c60bbe 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -23,6 +23,11 @@
"google,pi", "google,peach", "samsung,exynos5800",
"samsung,exynos5";
+ aliases {
+ /* Assign 20 so we don't get confused w/ builtin ones */
+ i2c20 = "/spi at 12d40000/cros-ec at 0/i2c-tunnel";
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
@@ -85,6 +90,13 @@
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
};
+
+ vbat: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&dp {
@@ -229,6 +241,20 @@
samsung,pin-drv = <0>;
};
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
dp_hpd_gpio: dp_hpd_gpio {
samsung,pins = "gpx2-6";
samsung,pin-function = <0>;
@@ -245,6 +271,19 @@
};
&pinctrl_3 {
+ /* Drive SPI lines at x2 for better integrity */
+ spi2-bus {
+ samsung,pin-drv = <2>;
+ };
+
+ /* Drive SPI chip select at x2 for better integrity */
+ ec_spi_cs: ec-spi-cs {
+ samsung,pins = "gpb1-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
usb300_vbus_en: usb300-vbus-en {
samsung,pins = "gph0-0";
samsung,pin-function = <1>;
@@ -264,6 +303,111 @@
status = "okay";
};
+&spi_2 {
+ status = "okay";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ cs-gpios = <&gpb1 2 0>;
+
+ cros_ec: cros-ec at 0 {
+ compatible = "google,cros-ec-spi";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_spi_cs &ec_irq>;
+ reg = <0>;
+ spi-max-frequency = <3125000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <1>;
+ };
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ google,remote-bus = <0>;
+
+ battery: sbs-battery at b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ sbs,i2c-retry-count = <2>;
+ };
+
+ power-regulator at 48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ tps65090_dcdc1: dcdc1 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc2: dcdc2 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc3: dcdc3 {
+ ti,enable-ext-control;
+ };
+ tps65090_fet1: fet1 {
+ regulator-name = "vcd_led";
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ };
+ tps65090_fet3: fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ };
+ tps65090_fet4: fet4 {
+ regulator-name = "sdcard";
+ regulator-always-on;
+ };
+ tps65090_fet5: fet5 {
+ regulator-name = "camout";
+ };
+ tps65090_fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ };
+ tps65090_ldo1: ldo1 {
+ };
+ tps65090_ldo2: ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
+ };
+ };
+};
+
&uart_3 {
status = "okay";
};
@@ -285,3 +429,4 @@
timeout-sec = <32>;
};
+#include "cros-ec-keyboard.dtsi"
--
2.0.0.526.g5318336
More information about the linux-arm-kernel
mailing list